AEG 10500 VI manual Cleaning and maintenance, After each wash, Maintenance Wash

Page 28

 

 

 

 

132996260.qxd 7/24/01 9:12 PM Pagina 28

(Nero/Process Black pellicola)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Cleaning and maintenance

After each wash

At the end of the wash programme, pull the dispenser drawer out a lit- tle to let it dry.

Leave the door ajar to allow air to circulate.

If the machine is not used for a prolonged period:

Close the water tap and unplug the appliance.

Maintenance Wash

With the use of low temperature washes it is possible to get a build up of residues inside the drum.

We recommend that a maintenance wash be performed on a regular basis.

To run a maintenance wash:

The drum should be empty of laundry.

Select the hottest cotton wash programme.

Use a normal measure of detergent, must be a powder (such as Ariel Futur).

Periodical cleaning

Exterior

Clean the outside of the cabinet with soap and water only. Rinse with clean water and dry.

Important: do not use methylated spirits, solvents or similar products to clean the cabinet.

Detergent dispenser drawer

After a while, detergents and fabric softeners leave deposits in the drawer.

Clean the drawer, from time to time, by rinsing it under a running

tap. To remove the drawer from

the machine, press the button

in the rear left-hand corner.

28

Image 28
Contents Lavamat 10500 Dear customer Contents Programme charts wash and special programmes Contents General safety Safety instructionsInstallation Child safety During useDisposal Tips for environmental protectionPackaging materials MachineMain features of your washing machine Description of the appliance Front viewProgramme selector dial Control panelAccording to the type of laundry Delay Start button ON/OFF buttonMains-on light START/PAUSE buttonProgramme Option buttons This function cannot be used with Quick Wash and PrewashQuick Wash Programme progress display DisplayDisplay shows the following information Cancelling/Altering a programme Opening the door after the programme has startedDetergent dispenser drawer Programme chartBefore the first wash Preparing the wash cycle Sorting out and preparing the laundryCotton Types of fabric and care labelsSynthetics Easy-cares Delicates 40 Detergents and additives Which detergent?Which form? Traditional PowdersHow to wash Switching the machine onLoad the laundry Add detergent and additiveSelection of the Delay Start option Selection of the desired wash programmeSelection of the STAIN, Prewash or Quick Wash option Selection of the Rinse Hold and/or Extra Rinse optionStarting the programme If the delay start option has been selected,At the end of the programme Programme chart Wash programmesSpecial programmes LaundryCleaning and maintenance Maintenance WashPeriodical cleaning Exterior After each washDoor seal Drain filterWater inlet filter Pull out the filterFrost precautions Emergency emptying outTroubleshooting Something not working?Problem Noisy Feet have not been Problem Possible cause Solution Unsatisfactory washing results If grey stains remain on the laundryFoam is still visible even after the last rinse White residue is left on the laundryWater pressure 50-800 kPa Technical dataThis appliance complies with the following EC directives Service & Spare Parts Service & Spare Parts08705 929 Help us to help youCustomer care Guarantee Conditions European Guarantee France Senlis +33 44 62 29 Germany Nürnberg +49Instructions for installation and electrical connection Safety instructions for the installerDimensions of the appliance Installation UnpackingCarefully slide out the right poly- thene bag Previously removed screwLevelling PositioningSet the machine Water drainage Water inlet cold water connection onlyDo not connect to a hot water supply Interest of the environment Upright standpipe should have a miniElbow to the top of the pipe see dia Covered with waterElectrical connections Accordance with the following codeGreen and Yellow Earth Blue Brown LivePermanent connection Preparation and assembly of the door Building-inDoor HingesMounting the door Counter-magnetInstalled adjust all four Drill four fixing holes see Position the base intoSee Fig. H With the appliance Feet ensuring the machineQxd 7/24/01 912 PM Pagina