AEG 10500 VI manual Problem

Page 32

 

 

 

 

132996260.qxd 7/24/01 9:12 PM Pagina 32

(Nero/Process Black pellicola)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Something not working?

Problem

The machine does not fill

The machine fills then empties immediately

The machine does not empty and/or does not spin

There is water on the floor

Possible cause

Solution

 

 

The water tap is closed (E10).

Open the water tap.

The water inlet hose is

Check the whole length of the

squashed or kinked (E10).

hose and remove the kink.

The small filter of the water

Clean the filter.

inlet hose is clogged (E10).

 

The door is not properly

Close the door.

closed (E40).

 

The end of the drain hose

Place the hose at the right

is too low.

height (see Installation

 

section).

 

 

The drain hose is

Check the whole length of

squashed or kinked (E20).

the hose and remove the

 

kink.

The drain filter or the

Clean the filter or check

drain hose are clogged (E20). the hose.

The RINSE HOLD option

Empty out the water by

(stop with water in drum)

pressing the START button

has been selected.

or selecting the DRAIN

 

programme.

The laundry is not evenly

Redistribute the laundry

distributed inside the drum.

manually in the drum.

 

 

Too much detergent has

Measure detergent

been used.

according to the

 

manufacturer’s instructions.

An unsuitable detergent

Use a suitable washing

has been used that

machine detergent.

creates too much foam.

 

One of the connectors on

Check that the hose is

the water inlet hose is

firmly screwed on at both

leaking.

ends.

The drain filter has not

Fully screw the filter into

been properly screwed on

place.

after cleaning.

 

32

Image 32
Contents Lavamat 10500 Dear customer Contents Programme charts wash and special programmes Contents Installation Safety instructionsGeneral safety Child safety During useDisposal Tips for environmental protectionPackaging materials MachineMain features of your washing machine Description of the appliance Front viewAccording to the type of laundry Control panelProgramme selector dial Delay Start button ON/OFF buttonMains-on light START/PAUSE buttonProgramme Option buttons This function cannot be used with Quick Wash and PrewashQuick Wash Display shows the following information DisplayProgramme progress display Cancelling/Altering a programme Opening the door after the programme has startedBefore the first wash Programme chartDetergent dispenser drawer Preparing the wash cycle Sorting out and preparing the laundrySynthetics Easy-cares Types of fabric and care labelsCotton Delicates 40 Detergents and additives Which detergent?Which form? Traditional PowdersHow to wash Switching the machine onLoad the laundry Add detergent and additiveSelection of the Delay Start option Selection of the desired wash programmeSelection of the STAIN, Prewash or Quick Wash option Selection of the Rinse Hold and/or Extra Rinse optionAt the end of the programme If the delay start option has been selected,Starting the programme Programme chart Wash programmesSpecial programmes LaundryCleaning and maintenance Maintenance WashPeriodical cleaning Exterior After each washDoor seal Drain filterWater inlet filter Pull out the filterFrost precautions Emergency emptying outTroubleshooting Something not working?Problem Noisy Feet have not been Problem Possible cause Solution Unsatisfactory washing results If grey stains remain on the laundryFoam is still visible even after the last rinse White residue is left on the laundryThis appliance complies with the following EC directives Technical dataWater pressure 50-800 kPa Service & Spare Parts Service & Spare Parts08705 929 Help us to help youCustomer care Guarantee Conditions European Guarantee France Senlis +33 44 62 29 Germany Nürnberg +49Instructions for installation and electrical connection Safety instructions for the installerDimensions of the appliance Installation UnpackingCarefully slide out the right poly- thene bag Previously removed screwSet the machine PositioningLevelling Do not connect to a hot water supply Water inlet cold water connection onlyWater drainage Interest of the environment Upright standpipe should have a miniElbow to the top of the pipe see dia Covered with waterElectrical connections Accordance with the following codeGreen and Yellow Earth Blue Brown LivePermanent connection Preparation and assembly of the door Building-inDoor HingesMounting the door Counter-magnetInstalled adjust all four Drill four fixing holes see Position the base intoSee Fig. H With the appliance Feet ensuring the machineQxd 7/24/01 912 PM Pagina