AEG 10500 VI manual Door seal, Drain filter, Water inlet filter, Pull out the filter

Page 29

 

 

 

 

132996260.qxd 7/24/01 9:12 PM Pagina 29

(Nero/Process Black pellicola)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Cleaning and maintenance

To facilitate cleaning, the top part of the additive compartment can be removed.

Detergent can also accumulate inside the drawer recess: clean it with an old tooth- brush.

Refit the drawer after cleaning.

Door seal

Regularly check to see, if there are deposits or foreign objects in the rubber seal behind the door and remove them.

Drain filter

The drain filter collects threads and small objects inadvertently left in the laundry. Check regularly that the filter is clean.

Place a container under the filter and unscrew it; some water will come out of the filter.

Pull out the filter.

Clean the filter under a running

tap, then refit it, screwing it fully in.

Water inlet filter

If you notice that the machine is taking longer to fill, check that the filter in the water inlet hose is not blocked.

Turn off the water tap.

29

Image 29
Contents Lavamat 10500 Dear customer Contents Programme charts wash and special programmes Contents Installation Safety instructionsGeneral safety During use Child safetyTips for environmental protection DisposalPackaging materials MachineMain features of your washing machine Front view Description of the applianceAccording to the type of laundry Control panelProgramme selector dial ON/OFF button Delay Start buttonMains-on light START/PAUSE buttonThis function cannot be used with Quick Wash and Prewash Programme Option buttonsQuick Wash Display shows the following information DisplayProgramme progress display Opening the door after the programme has started Cancelling/Altering a programmeBefore the first wash Programme chartDetergent dispenser drawer Sorting out and preparing the laundry Preparing the wash cycleSynthetics Easy-cares Types of fabric and care labelsCotton Delicates 40 Which detergent? Detergents and additivesTraditional Powders Which form?Switching the machine on How to washLoad the laundry Add detergent and additiveSelection of the desired wash programme Selection of the Delay Start optionSelection of the STAIN, Prewash or Quick Wash option Selection of the Rinse Hold and/or Extra Rinse optionAt the end of the programme If the delay start option has been selected,Starting the programme Wash programmes Programme chartLaundry Special programmesMaintenance Wash Cleaning and maintenancePeriodical cleaning Exterior After each washDrain filter Door sealWater inlet filter Pull out the filterEmergency emptying out Frost precautionsSomething not working? TroubleshootingProblem Noisy Feet have not been Problem Possible cause Solution If grey stains remain on the laundry Unsatisfactory washing resultsFoam is still visible even after the last rinse White residue is left on the laundryThis appliance complies with the following EC directives Technical dataWater pressure 50-800 kPa Service & Spare Parts Service & Spare Parts08705 929 Help us to help youCustomer care Guarantee Conditions France Senlis +33 44 62 29 Germany Nürnberg +49 European GuaranteeSafety instructions for the installer Instructions for installation and electrical connectionDimensions of the appliance Unpacking InstallationCarefully slide out the right poly- thene bag Previously removed screwSet the machine PositioningLevelling Do not connect to a hot water supply Water inlet cold water connection onlyWater drainage Upright standpipe should have a mini Interest of the environmentElbow to the top of the pipe see dia Covered with waterAccordance with the following code Electrical connectionsGreen and Yellow Earth Blue Brown LivePermanent connection Building-in Preparation and assembly of the doorDoor HingesCounter-magnet Mounting the doorDrill four fixing holes see Position the base into Installed adjust all fourSee Fig. H With the appliance Feet ensuring the machineQxd 7/24/01 912 PM Pagina