AEG 10500 VI manual Quick Wash

Page 14

 

 

 

 

132996260.qxd 7/24/01 9:12 PM Pagina 14

(Nero/Process Black pellicola)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Description of the appliance

QUICK WASH

By pressing this button the washing time is reduced. For use when washing lightly soiled laundry.

This option is not available with the wool and economy programme and cannot be used with STAIN.

RINSE HOLD

By selecting this option, the last rinse water is not emptied out, to prevent the fabrics from creasing. When the programme has finished, the corresponding pilot light on the programme progress display illumi- nates to indicate that the water must be emptied out. The light of START/PAUSE button flashes.

To empty out water:

press the START/PAUSE button: after emptying, the machine performs the spin cycle required for the type of wash selected;

select the spin speed and press START/PAUSE-button;

select the DRAIN programme to empty out the water without spin- ning.

Warning! The programme selector dial must be turned first to RESET and then to the DRAIN programme.

If the water is not emptied out, the machine automatically empties itself after 18 hours.

EXTRA RINSE

Can be used with all programmes except the wool programme. The machine performs 4 rinses instead of 3.

This option is recommended for people who are allergic to detergents and in areas where the water is very soft.

14

Image 14
Contents Lavamat 10500 Dear customer Contents Programme charts wash and special programmes Contents Installation Safety instructionsGeneral safety Child safety During usePackaging materials DisposalTips for environmental protection MachineMain features of your washing machine Description of the appliance Front view According to the type of laundry Control panel Programme selector dial Mains-on light Delay Start buttonON/OFF button START/PAUSE buttonProgramme Option buttons This function cannot be used with Quick Wash and PrewashQuick Wash Display shows the following information DisplayProgramme progress display Cancelling/Altering a programme Opening the door after the programme has startedBefore the first wash Programme chartDetergent dispenser drawer Preparing the wash cycle Sorting out and preparing the laundrySynthetics Easy-cares Types of fabric and care labelsCotton Delicates 40 Detergents and additives Which detergent?Which form? Traditional PowdersLoad the laundry How to washSwitching the machine on Add detergent and additiveSelection of the STAIN, Prewash or Quick Wash option Selection of the Delay Start optionSelection of the desired wash programme Selection of the Rinse Hold and/or Extra Rinse optionAt the end of the programme If the delay start option has been selected,Starting the programme Programme chart Wash programmesSpecial programmes LaundryPeriodical cleaning Exterior Cleaning and maintenanceMaintenance Wash After each washWater inlet filter Door sealDrain filter Pull out the filterFrost precautions Emergency emptying outTroubleshooting Something not working?Problem Noisy Feet have not been Problem Possible cause Solution Foam is still visible even after the last rinse Unsatisfactory washing resultsIf grey stains remain on the laundry White residue is left on the laundryThis appliance complies with the following EC directives Technical dataWater pressure 50-800 kPa 08705 929 Service & Spare PartsService & Spare Parts Help us to help youCustomer care Guarantee Conditions European Guarantee France Senlis +33 44 62 29 Germany Nürnberg +49Instructions for installation and electrical connection Safety instructions for the installerDimensions of the appliance Carefully slide out the right poly- thene bag InstallationUnpacking Previously removed screwSet the machine PositioningLevelling Do not connect to a hot water supply Water inlet cold water connection onlyWater drainage Elbow to the top of the pipe see dia Interest of the environmentUpright standpipe should have a mini Covered with waterGreen and Yellow Earth Blue Electrical connectionsAccordance with the following code Brown LivePermanent connection Door Preparation and assembly of the doorBuilding-in HingesMounting the door Counter-magnetSee Fig. H With the appliance Installed adjust all fourDrill four fixing holes see Position the base into Feet ensuring the machineQxd 7/24/01 912 PM Pagina