AEG 10500 VI manual Unsatisfactory washing results, If grey stains remain on the laundry

Page 35

 

 

 

 

132996260.qxd 7/24/01 9:12 PM Pagina 35

(Nero/Process Black pellicola)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Something not working?

Unsatisfactory washing results

If the laundry looks grey and lime scale is found in the drum

Too little detergent has been used.

An unsuitable detergent has been used.

Stubborn stains have not been treated prior to washing.

The programme/temperature has not been correctly selected.

If grey stains remain on the laundry

Laundry stained with ointments, grease or oil has been washed with an insufficient amount of detergent.

The temperature selected for the wash programme was too low.

Fabric softener - especially the concentrated type - has come into direct contact with the laundry. Wash these stains immediately and pour fabric softener carefully.

Foam is still visible even after the last rinse

Modern detergents often produce foam, even in the last rinse. How- ever the laundry has been completely rinsed.

White residue is left on the laundry

This is due to insoluble components in modern detergents and is therefore not the result of insufficient rinsing. Shake or brush the laundry. In future, it may be better to turn garments inside out before washing them. Check the choice of detergent; try using liquid deter- gents.

35

Image 35
Contents Lavamat 10500 Dear customer Contents Programme charts wash and special programmes Contents Installation Safety instructionsGeneral safety During use Child safetyMachine DisposalTips for environmental protection Packaging materialsMain features of your washing machine Front view Description of the applianceAccording to the type of laundry Control panelProgramme selector dial START/PAUSE button Delay Start buttonON/OFF button Mains-on lightThis function cannot be used with Quick Wash and Prewash Programme Option buttonsQuick Wash Display shows the following information DisplayProgramme progress display Opening the door after the programme has started Cancelling/Altering a programmeBefore the first wash Programme chartDetergent dispenser drawer Sorting out and preparing the laundry Preparing the wash cycleSynthetics Easy-cares Types of fabric and care labelsCotton Delicates 40 Which detergent? Detergents and additivesTraditional Powders Which form?Add detergent and additive How to washSwitching the machine on Load the laundrySelection of the Rinse Hold and/or Extra Rinse option Selection of the Delay Start optionSelection of the desired wash programme Selection of the STAIN, Prewash or Quick Wash optionAt the end of the programme If the delay start option has been selected,Starting the programme Wash programmes Programme chartLaundry Special programmesAfter each wash Cleaning and maintenanceMaintenance Wash Periodical cleaning ExteriorPull out the filter Door sealDrain filter Water inlet filterEmergency emptying out Frost precautionsSomething not working? TroubleshootingProblem Noisy Feet have not been Problem Possible cause Solution White residue is left on the laundry Unsatisfactory washing resultsIf grey stains remain on the laundry Foam is still visible even after the last rinseThis appliance complies with the following EC directives Technical dataWater pressure 50-800 kPa Help us to help you Service & Spare PartsService & Spare Parts 08705 929Customer care Guarantee Conditions France Senlis +33 44 62 29 Germany Nürnberg +49 European GuaranteeSafety instructions for the installer Instructions for installation and electrical connectionDimensions of the appliance Previously removed screw InstallationUnpacking Carefully slide out the right poly- thene bagSet the machine PositioningLevelling Do not connect to a hot water supply Water inlet cold water connection onlyWater drainage Covered with water Interest of the environmentUpright standpipe should have a mini Elbow to the top of the pipe see diaBrown Live Electrical connectionsAccordance with the following code Green and Yellow Earth BluePermanent connection Hinges Preparation and assembly of the doorBuilding-in DoorCounter-magnet Mounting the doorFeet ensuring the machine Installed adjust all fourDrill four fixing holes see Position the base into See Fig. H With the applianceQxd 7/24/01 912 PM Pagina