Prima LPR 712 manual Select the required options, Start the programme, At the end of the programme

Page 10

4. Select the required programme

Turn the programme selector dial to the desired position.

Prewash Wash Rinse rinse hold Drain Spin Filter End

The pilot lights corresponding to the different phases making up the selected programme light on.

If your laundry needs a soak time, turn the programme selector dial to “Soak 30°” and then, before starting a washing cycle, drain the water as described in the “End of Soak 30 programme ” paragraph.

5.Select the “spin” speed or “rinse hold” option

Depress the spin speed button to choose the required speed or “Rinse Hold” option : the corresponding light comes on.

1200

900

700

500

Spin

6. Select the required options

The light corresponding to the pressed button illuminates.

Extra Easy

Quick Prewash ERinse Iron

7. Start the programme

To start the selected programme, press the

Start/Pause” button; the corresponding light stops flashing.

The pilot light corresponding to the wash phase which is running is on.

The machine starts operating.

Start/

Pause

8. At the end of the programme

The machine stops automatically. The light of the

Start/Pause” button goes out, the “End” pilot light illuminates and the door can be opened.

If the “Rinse Hold” option has been selected, the door will be locked, the light of the “Start/Pause” button goes off, the only “Rinse Hold” pilot light remains lit to indicate that the water must be drained before opening the door.

To empty out the water you can, after turning the programme selector dial to “o” position:

select programme “Drain”, the water is emptied out without spinning

select programme “Spin”. Select the spin speed by means of the relevant button and then press the “Start/Pause” button. The water is emptied out and the laundry is spun at the selected spin speed.

At the End of the cycle, and the “End” light illuminates. The door can be opened.

Turn the programme selector dial to Reset “o”.

Switch the machine off by pressing the “On/Off” button.

Remove the laundry from the drum and carefully check that the drum is empty so as to avoid any forgotten items being damaged in a subsequent wash (e.g. shrinking) or their colour running into a load of whites.

If you do not intEnd to carry out another wash, close the water tap.

Leave the door open to prevent the formation of mildew and unpleasant smells.

10

Image 10
Contents Washing Machine Child Safety InstallationUse Contents Ecological hints Your New Washing MachineInterest of the environment Detergent dispenser drawer Child safety featureDescription of the Appliance Prewash Main wash Fabric softenerOn/Off button Control Panel1Detergent dispenser drawer Mains-on light Spin buttonEasy Iron button Prewash buttonExtra Rinse button Start/Pause buttonInterrupting a programme Programme informationAltering an option or a running programme Opening the door after the programme has startedOperating Sequence Switch the machine onLoad the laundry At the end of the programme Select the required optionsStart the programme Turn the programme selector dial to the desired positionWashing Hints 1000g = 1 kgWhich detergent? Which form?Wash Care Symbols Important NotesWashing Programmes Special Programmes Min SoakMaintenance and Cleaning Emergency emptying out Water inlet filterSomething Not Working 0870 5 Service & Spare PartsSymptom Possible causes Customer Care DepartmentEuropean guarantee Guarantee ConditionsStandard guarantee conditions This guarantee does not coverInstallation Instructions Technical SpecificationsWater inlet UnpackingPositioning Appliance must be connected to a cold water supplyInto a drainage standpipe Water drainageJoining piece must have an internal diameter of 18mm StandpipeLevelling Special conditionsPermanent connection Electrical connectionBlue- Neutral Brown- Live Preparation and assembly of the door Building-inFront view Plc