“Softener”
Hand washed cotton garments can be softened with this programme. The machine performs 1 rinse, followed by a final spin at the max. speed, which can be reduced by pressing “Spin” button.
“Drain”
For emptying out the water of the last rinse in programmes with the “Rinse Hold” option or at the end of the Soak 30° programme.
Turn first the programme selector dial to “o”, then select “Drain” programme and press the “Start/Pause” button.
“Spin”
Separate long spin at the maximum speed for hand washed cotton garments.
“Mini”
This is a complete programme that can be combined with the following options: “Spin” reduction and “Rinse Hold”. To be used for laundry which is lightly soiled or which needs freshening up. Max load: 2 kg. Washing temperature: 30°C, programme duration: 30 minutes, final spin speed: 700 r.p.m.
“o”
To reset a programme turn the selector dial to “o”. Now can a new programme be selected.
Operating Sequence
Before the first wash, we recommend that you pour 2
litres of water into the main wash compartment 
of the detergent drawer in order to activate the ECO valve. Then run a cotton cycle at 90°C, without any laundry in the machine, to remove any manufacturing residue from the drum and tub.
If you have selected the prewash option or the soak 30° programme, pour detergent into the wash compartment marked 
.
If required, pour fabric softener into the compartment marked 
(the amount used must not exceed the “MAX” mark in the drawer). Close the drawer gently.
Pour 1/2 a measure of detergent and start the machine.
1. Load the laundry
Open the door by pulling the door handle outwards. Place the laundry in the drum, one item at a time, shaking them out as much as possible.
Close the door.
P0006 |
P0005 |
P0004
2.Measure out the detergent and the fabric softener
Pull out the dispenser drawer until it stops.
Measure out the amount of detergent required and pour it into the main wash compartment 
.
3. Switch the machine on
To switch the machine on, press the “on/off” button: the
On/Off
9