Nilfisk-ALTO R 571 Level Indicators for the Charge of the Batteries, How To Install the Squeegee

Page 13

How To Prepare the Machine For

Operation

Level Indicators for the Charge of the Batteries

The battery meter ( see figure 7) on the control panel has a digital read out with 10 fixed positions (A) and also a blinking indicator (B). The bars that appear on the display show the approximate charge level with icon (blinking) discharged battery.

NOTE: A few seconds after the voltage reads 32V it will start blinking. The brush motors will then automatically switch off.

How To Install the Squeegee

To install the squeegee onto the machine, follow this procedure:

1.The squeegee assembly has a break away feature that is also used for mounting the squeegee. Loosen the knobs on the squeegee (figure 8). Slide the stud into the slotted hole in the support frame on the machine.

2.Attach the vacuum hose cuff to the squeegee hose fitting (see figure 9).

3.Tighten knobs. NOTE: Do not overtighten or break away feature is lost and damage may occur.

NOTE: To prevent damage to the squeegee or machine, the squeegee was designed to break away from the machine. If the squeegee is impacted and it breaks away from the machine, simply reinstall it by following step 1-3.

How to Adjust the Squeegee

During operation, the rear squeegee blade should have a constant 3/16” minimum flare along the entire squeegee blade (see figure 10).

1.The squeegee body can be tilted to adjust the squeegee blade flare in the middle to match the flare on the ends. To adjust the tilt, loosen the adjusting bolt located on the left and right side of the squeegee (see figure 9).

2.Press down on the squeegee until both sets of guide wheels contact floor.

3.After making adjustments, retighten the screw(s).

NOTE: It is important that the right and left wheels are contacting the floor in order for the squeegee to work.

NOTE: As the rear squeegee blade wears, it can be rotated and/or flipped to obtain four good edges before having to change blades.

A

B

Figure 7

Figure 8

Figure 9

3/16” minimum

Figure 10

CLARKE TECHNOLOGY Operator's Manual - SCRUBTEC R Manual Steering

Page -13-

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Operators Manual Table of Contents Operator Safety Instructions Page Introduction Introduction & Machine SpecificationsReadoperators Manualbeforeoperating Thismachine Riskoffire Symbols Used On Scrubtec RSCREEN1 Display Screens For Scrubtec RMachine Control Panel Recovery Tank Float Machine Controls and FeaturesReverse Alarm TraverseHow To Handle the Packed Machine How To Prepare the Machine For OperationHow to Unpack the Machine How to Install the BatteriesCorrect Fill Shown with Optional Chemical Mixing Sytem How To Install the Squeegee Level Indicators for the Charge of the BatteriesHow To Change or Rotate Brushes on Cylindrical Brush Head How To Remove The Brush Or Pad on the Boost machine How To Install The Brush Or Pad on the Boost machineHow to Return One Touch to Factory Default Settings How To Operate The MachineHow to Move the Machine Without Power see figure Seat Adjustment StandardHow to Read the Solution Empty Indicator see , a How to Read the Battery Meter see , aHow to Read the Recovery Full Indicator see , B How to Operate the Solution Flow How to Operate the Squeegee and the Vacuum MotorHow to Operate the Brush Pressure How to Fill the Solution Tank How to Operate the Forward / Reverse Switch see figureStarting to clean, put a minimum Recovery tank. Never USE PureDo These Procedures When You Begin Your Work Period To traverse the machine follow this procedureHow To Operate the Machine Do These Procedures When You End Your Work Period How to Clean a Very Dirty FloorSolutions when preforming the steps Use gloves to protect your handsContaminants that will damage Tap water may containBatteries. Batteries must be Refilled with distilled water onlyCleaning the Recovery Tank and Filter MaintenanceMake sure that the tank is empty first Manually Draining the Solution Tank Cleaning the Solution Tank and FilterVac Assisted Solution Tank Drain Squeegee MaintenanceCleaning the Vacuum Hoses Rear Squeegee Blade ReplacementHOW to Correct Problems in the Machine Cause Action Cause Action Accessories and Options Page 71274A SectionClarketechnology Final Assembly Drawing 10/06Qty Description Rotary Cyl Boost Final Assembly Parts List 10/06Scrubtec R 571 Main Frame Assembly Drawing Rotary 9/06 Drawing#11098ADescription Qty Main Frame Assembly Parts List Rotary 5/07 Drawing#11098AClarketechnology Scrubtec R 571C Main Frame Assembly Drawing 9/06 Drawing#10949SMain Frame Assembly Parts List 9/06 Drawing#10949S Clarketechnology Scrubtec Boost R Main Frame Assembly Drawing 3/08 Drawing#11107AMain Frame Assembly Parts List 3/08 Drawing#11107A Optional Side Squeegee Lift Assembly Drawing 5/05 Optional Side Squeegee Lift Assembly Parts List 5/05 Scrubtec R 571, 586, 571 C, Boost R 1611 18, 18A Clarketechnology Clarketechnology Clarketechnology Clarketechnology Clarketechnology 3130 Steering Column Assembly Drawing 5/07 Drawing # 11087BSteering Column Assembly Parts List 5/07 Drawing # 11087B 1A, 1B, 1C 1A, 1B, 1C 2 3 4 20 19 18 17 Assembled View Cylindrical Head Assembly Drawing 5/05 Drawing#10962ACylindrical Head Assembly Parts List 3/05 Drawing#10962A Boost Head Assembly Drawing 10/06 Drawing#11103A Boost Head Assembly Drawing 6/07 Drawing#11103A Squeegee Assembly Drawing 3/08 Drawing # 10802A Ref. # Description Qty 99cm104cm Qty Optional Not supplied with machine Scrubtec R 571 Clarketechnology 6 5 Pages Electrical Connection Diagram 9/06Electrical Connection Diagram 9/06 Clarketechnology Clarketechnology Clarketechnology Clarketechnology Page Nilfisk-ALTO Division of Nilfisk-Advance A/S Norway Clarke Technology Limited U.S. Warranty
Related manuals
Manual 76 pages 18.86 Kb

BOOST R, R 571, R 586, 571 C, SCRUBTEC R 571 specifications

Nilfisk-ALTO has long been recognized for its commitment to delivering high-quality cleaning solutions, and the Nilfisk-ALTO 586, 571, R 571 C, SCRUBTEC R 586, and SCRUBTEC R 571 models exemplify this dedication. These compact and efficient scrubbers are designed for effective cleaning in various environments, making them suitable for both industrial and commercial applications.

The Nilfisk-ALTO 586 and SCRUBTEC R 586 models feature advanced scrubbing technology, providing users with exceptional cleaning results. They are equipped with a highly efficient brush system that can adapt to different floor surfaces, ensuring optimal cleaning performance whether in retail spaces, warehouses, or manufacturing facilities. The unique brush design simplifies the replacement process, allowing operators to switch brushes quickly and easily.

Among their key characteristics is the ability to adjust the water flow and detergent dose to suit the specific cleaning requirements. This contributes to sustainability, as it minimizes water and detergent waste while maximizing cleaning efficacy. Additionally, their ergonomic design promotes user comfort during operation, reducing fatigue during extended cleaning tasks.

The SCRUBTEC R 571 and R 571 C models bring technological advancements, including a patented electronic control system that manages all aspects of the cleaning process. This system allows users to monitor performance metrics in real-time, providing valuable insights into efficiency and usage patterns. Integrated with a large capacity solution tank, these machines can sustain longer cleaning cycles without frequent refills, making them ideal for larger areas.

Another notable feature is the ultra-compact design of these models, which facilitates maneuverability in tight spaces. Their low profile and slim design allow operators to access hard-to-reach areas, ensuring comprehensive cleaning results. Furthermore, the machines are equipped with advanced noise reduction technology, making them suitable for use in noise-sensitive environments.

Overall, the Nilfisk-ALTO 586, 571, R 571 C, SCRUBTEC R 586, and SCRUBTEC R 571 smoothie’s state-of-the-art features and technologies offer exceptional cleaning efficiency. Their operational flexibility, coupled with user-friendly controls, positions them as an ideal choice for businesses looking to invest in reliable and effective floor cleaning solutions. With Nilfisk-ALTO, users can count on superior performance and durability built into every model.
Top Page Image Contents