Nilfisk-ALTO R 571 C, SCRUBTEC R 586, SCRUBTEC R 571 Clarke Technology Limited U.S. Warranty

Page 72

CLARKE TECHNOLOGY LIMITED U.S. WARRANTY

This Clarke Technology Industrial/Commercial Product is warranted to be free from defects in materials and workman- ship under normal use and service, when operated and maintained in accordance with Clarke Technology’'s Maintenance and Operations instructions. The warranty period is subject to the conditions stated below.

3 YEARS FOR PARTS AND 1 YEAR FOR SERVICE LABOR (See exceptions below)

Motors must be inspected for carbon motor brush wear at six-month intervals by an authorized Clarke Technology repair station. Failure to comply with the six-month inspection requirement or failure to replace worn motor brushes identified during the inspection will void the warranty on the motors. Cost of the six-month inspection and replacement of carbon motor brushes is the responsibility of the purchaser. In the event of a warranty claim on the motors, proof of inspection and any required motor brush replacement must be provided. This warranty is extended only to the original purchaser for use of the product. It does not cover normal wear parts such as electrical cable, rubber parts, hoses and motor brushes.

BATTERY WARRANTY

In addition to the items above, any original equipment Clarke Technology Battery which becomes unserviceable under normal use within a period of ninety (90) days from date of sale to the original user will be repaired or replaced with one of equal specification at our option, F.O.B. any authorized Clarke Technology Sales or Service Branch, with no charge to the user, except transportation costs. After expiration of the above ninety (90) day period, any battery which fails under normal use will be adjusted to the original user with a new battery of equal specification on an eighteen (18) months pro rate basis from the date of purchase. Adjustment will be determined using the then current list price, plus transportation costs.

Warranty is rendered null and void if battery is not kept filled to the proper level with DISTILLED WATER.

CLARKE TECHNOLOGY: POLYDUR® AUTOMATIC SCRUBBER SOLUTIONAND RECOVERY TANK EIGHT-

YEAR U.S. GUARANTEE

Your new Clarke Technology machine has polydur Solution and Recovery Tanks. Polydur is a rotationally molded, low- density linear polyethylene that won't crack or dent, and withstands most corrosives and temperature extremes. Clarke Technology backs up your Polydur tanks with an eight-year guarantee. If a tank breaks or leaks under normal use within eight years of the date of purchase, it will be replaced free.

CLARKE TECHNOLOGYUNIBODY FRAME FIVE-YEAR U.S. WARRANTY

Clarke Technology warranties the frame for a period of five years against defects in materials and workmanship under normal use and service.

STATED WARRANTIES ARE IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED

Clarke Technology's liability under this warranty is limited to repair of the product and/or replacement of parts and is given to purchaser in lieu of all other remedies, including INCIDENTAL AND CONSEQUENTIAL DAMAGES.

THEREARE NO EXPRESS WARRANTIES OTHER THAN THOSE SPECIFIED HEREIN. THEREARE NO WARRANTIES WHICH EXTEND BEYOND THE DESCRIPTION OF THE FACE HEREOF. NO WARRANTIES, INCLUDING BUT NOT LIMITED TO WAR- RANTY OF MERCHANTABILITY, SHALL BE IMPLIED. A warranty registration card is provided with your Clarke Technology product. Return the card to assist Clarke Technology in providing the performance you expect from your new floor machine.

If a difficulty develops with the product, you should: a) Contact the nearest authorized Clarke Technology repair location or contact the Clarke Technology Service Operations Department, 2100 Highway 265, Springdale, Arkansas 72764, for the nearest authorized Clarke Technology repair location. Only these locations are authorized to make repairs to the product under this warranty. (b) Return the product to the nearest Clarke Technology repair location. Transportation charges to and from the repair location must be prepaid by the purchaser. Clarke Technology will repair the product and/or replace any defective parts with out charge within a reasonable time after receipt of the product.

ALTO, 2100 Highway 265, Springdale, Arkansas 72764.

ALTO reserves the right to make changes or improvements to its machine without notice.

Always use genuine ALTO Parts for repair.

2100 Highway 265

Springdale, Arkansas, 72764

Page -72-

CLARKE TECHNOLOGY Operator's Manual - SCRUBTEC R Manual Steering

Page 71 Page 72
Image 72
Page 71 Page 72
Contents Operators Manual Table of Contents Operator Safety Instructions Page Introduction & Machine Specifications IntroductionSymbols Used On Scrubtec R Readoperators Manualbeforeoperating Thismachine RiskoffireDisplay Screens For Scrubtec R SCREEN1Machine Control Panel Machine Controls and Features Recovery Tank FloatReverse Alarm TraverseHow To Prepare the Machine For Operation How To Handle the Packed MachineHow to Unpack the Machine How to Install the BatteriesCorrect Fill Shown with Optional Chemical Mixing Sytem Level Indicators for the Charge of the Batteries How To Install the SqueegeeHow To Change or Rotate Brushes on Cylindrical Brush Head How To Install The Brush Or Pad on the Boost machine How To Remove The Brush Or Pad on the Boost machineHow To Operate The Machine How to Return One Touch to Factory Default SettingsHow to Move the Machine Without Power see figure Seat Adjustment StandardHow to Read the Battery Meter see , a How to Read the Solution Empty Indicator see , aHow to Read the Recovery Full Indicator see , B How to Operate the Squeegee and the Vacuum Motor How to Operate the Solution FlowHow to Operate the Brush Pressure How to Operate the Forward / Reverse Switch see figure How to Fill the Solution TankStarting to clean, put a minimum Recovery tank. Never USE PureTo traverse the machine follow this procedure Do These Procedures When You Begin Your Work PeriodHow To Operate the Machine How to Clean a Very Dirty Floor Do These Procedures When You End Your Work PeriodSolutions when preforming the steps Use gloves to protect your handsTap water may contain Contaminants that will damageBatteries. Batteries must be Refilled with distilled water onlyMaintenance Cleaning the Recovery Tank and FilterMake sure that the tank is empty first Cleaning the Solution Tank and Filter Manually Draining the Solution TankVac Assisted Solution Tank Drain Squeegee MaintenanceRear Squeegee Blade Replacement Cleaning the Vacuum HosesHOW to Correct Problems in the Machine Cause Action Cause Action Accessories and Options Page Section 71274AFinal Assembly Drawing 10/06 ClarketechnologyFinal Assembly Parts List 10/06 Qty Description Rotary Cyl BoostMain Frame Assembly Drawing Rotary 9/06 Drawing#11098A Scrubtec R 571Main Frame Assembly Parts List Rotary 5/07 Drawing#11098A Description QtyMain Frame Assembly Drawing 9/06 Drawing#10949S Clarketechnology Scrubtec R 571CMain Frame Assembly Parts List 9/06 Drawing#10949S Main Frame Assembly Drawing 3/08 Drawing#11107A Clarketechnology Scrubtec Boost RMain Frame Assembly Parts List 3/08 Drawing#11107A Optional Side Squeegee Lift Assembly Drawing 5/05 Optional Side Squeegee Lift Assembly Parts List 5/05 Scrubtec R 571, 586, 571 C, Boost R 1611 18, 18A Clarketechnology Clarketechnology Clarketechnology Clarketechnology Clarketechnology Steering Column Assembly Drawing 5/07 Drawing # 11087B 3130Steering Column Assembly Parts List 5/07 Drawing # 11087B 1A, 1B, 1C 1A, 1B, 1C 2 3 4 20 19 18 17 Cylindrical Head Assembly Drawing 5/05 Drawing#10962A Assembled ViewCylindrical Head Assembly Parts List 3/05 Drawing#10962A Boost Head Assembly Drawing 10/06 Drawing#11103A Boost Head Assembly Drawing 6/07 Drawing#11103A Squeegee Assembly Drawing 3/08 Drawing # 10802A 99cm Ref. # Description Qty104cm Qty Optional Not supplied with machine Scrubtec R 571 Clarketechnology 6 5 Electrical Connection Diagram 9/06 PagesElectrical Connection Diagram 9/06 Clarketechnology Clarketechnology Clarketechnology Clarketechnology Page Nilfisk-ALTO Division of Nilfisk-Advance A/S Norway Clarke Technology Limited U.S. Warranty
Related manuals
Manual 76 pages 18.86 Kb

BOOST R, R 571, R 586, 571 C, SCRUBTEC R 571 specifications

Nilfisk-ALTO has long been recognized for its commitment to delivering high-quality cleaning solutions, and the Nilfisk-ALTO 586, 571, R 571 C, SCRUBTEC R 586, and SCRUBTEC R 571 models exemplify this dedication. These compact and efficient scrubbers are designed for effective cleaning in various environments, making them suitable for both industrial and commercial applications.

The Nilfisk-ALTO 586 and SCRUBTEC R 586 models feature advanced scrubbing technology, providing users with exceptional cleaning results. They are equipped with a highly efficient brush system that can adapt to different floor surfaces, ensuring optimal cleaning performance whether in retail spaces, warehouses, or manufacturing facilities. The unique brush design simplifies the replacement process, allowing operators to switch brushes quickly and easily.

Among their key characteristics is the ability to adjust the water flow and detergent dose to suit the specific cleaning requirements. This contributes to sustainability, as it minimizes water and detergent waste while maximizing cleaning efficacy. Additionally, their ergonomic design promotes user comfort during operation, reducing fatigue during extended cleaning tasks.

The SCRUBTEC R 571 and R 571 C models bring technological advancements, including a patented electronic control system that manages all aspects of the cleaning process. This system allows users to monitor performance metrics in real-time, providing valuable insights into efficiency and usage patterns. Integrated with a large capacity solution tank, these machines can sustain longer cleaning cycles without frequent refills, making them ideal for larger areas.

Another notable feature is the ultra-compact design of these models, which facilitates maneuverability in tight spaces. Their low profile and slim design allow operators to access hard-to-reach areas, ensuring comprehensive cleaning results. Furthermore, the machines are equipped with advanced noise reduction technology, making them suitable for use in noise-sensitive environments.

Overall, the Nilfisk-ALTO 586, 571, R 571 C, SCRUBTEC R 586, and SCRUBTEC R 571 smoothie’s state-of-the-art features and technologies offer exceptional cleaning efficiency. Their operational flexibility, coupled with user-friendly controls, positions them as an ideal choice for businesses looking to invest in reliable and effective floor cleaning solutions. With Nilfisk-ALTO, users can count on superior performance and durability built into every model.
Top Page Image Contents