Nilfisk-ALTO SCRUBTEC R 571, R 571 C, SCRUBTEC R 586 Introduction & Machine Specifications

Page 5

English Correct Disposal of This Product (Waste Electrical & Electronic Equipment)

(Applicable in the European Union and other European countries with separate collection systems)

This marking shown on the product or its literature, indicates that it should not be disposed with other household wastes at the end of its working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources. Household users should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take this item for environmentally safe recycling.

Business users should contact their supplier and check the terms and conditions of the purchase contract. This product should not be mixed with other commercial wastes for disposal.

Introduction

Introduction & Machine Specifications

This is a floor cleaning machine which, using the mechanic abrasive action of brushes or pads and the chemical action of a water-detergent solution, is able to clean any type of floor. During its forward movement, it picks up the removed dirt and the detergent solution which has not been absorbed by the floor.

Model

SCRUBTEC R 571

SCRUBTEC R 586

SCRUBTEC R 571 C

SCRUBTEC BOOST® R

Part Number

 

 

 

 

Cleaning Swath

28” (71.1 cm)

34” (86.4 cm)

28” (71.1 cm)

32” (81.3 cm)

Power Supply

36 volt system using (6) 6 volt 250, 330, or 370 AH deep cycle batteries

 

 

 

 

 

Battery Charger

On-Board fully automatic smart charger, 115V 60 Hz or 230V 50 Hz

 

 

 

 

 

Brush Motors

(1) 2 hp (1.5 kW) driving

(1) 2.5 hp (1.9 kW) driving

(2) .75 hp (.56 kW)

(1) .75 hp (.56 kW)

 

two right angle gearboxes

two right angle gearboxes

 

 

 

 

 

 

 

Brush Size / Speed

(2) 14” (36 cm) 300 RPM

(2) 17” (43 cm) 300 RPM

(2) 6 x 28” (15.2 x 71.1

(1) 14 x 32” (35.6 x 81.3

 

 

 

cm) 300 RPM

cm) 2250 RPM

 

 

 

 

 

Brush Pressure

12 -225 lbs. (57-102 kg)

90-130 lbs. (41-59 kg)

115-155 lbs. (52-70 kg)

Traverse Speed (max)

 

4.1 mph (6.6 kph)

 

Traverse

1.5 hp (1.1 kW) transaxle powering of two 10” (25.4 cm) diameter rear wheels

Max. Cleaning Grade

 

6 degree

 

 

 

 

 

 

 

Vacuum Motor

 

1 hp (.75 kW) 3 stage tangential discharge

 

 

 

 

 

 

Noise Level

 

70 dBA

 

 

Solution Tank

 

30 gallon (113 liter)

 

Recovery Tank

 

30 gallon (113 liter)

 

Length

 

65” (165 cm)

 

Width

33” (84 cm)

35.5” (90 cm)

30” (130 cm)

33” (84 cm)

 

 

 

 

 

Height

 

56” (142cm)

 

Machine Weight

 

 

 

 

w/330 AH batteries

1478 lbs. (670 kg)

1498 lbs. (679 kg)

1498 lbs. (679 kg)

1488 lbs. (675 kg)

& full of solution

 

 

 

 

 

 

 

 

 

Warranty

8 years PolydurTM tanks, 3 years parts, 1 year labor, 18 months pro-rated batteries

CLARKE TECHNOLOGY Operator's Manual - SCRUBTEC R Manual Steering

Page -5-

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Operators Manual Table of Contents Operator Safety Instructions Page Introduction Introduction & Machine SpecificationsReadoperators Manualbeforeoperating Thismachine Riskoffire Symbols Used On Scrubtec RSCREEN1 Display Screens For Scrubtec RMachine Control Panel Recovery Tank Float Machine Controls and FeaturesReverse Alarm TraverseHow To Handle the Packed Machine How To Prepare the Machine For OperationHow to Unpack the Machine How to Install the BatteriesCorrect Fill Shown with Optional Chemical Mixing Sytem How To Install the Squeegee Level Indicators for the Charge of the BatteriesHow To Change or Rotate Brushes on Cylindrical Brush Head How To Remove The Brush Or Pad on the Boost machine How To Install The Brush Or Pad on the Boost machineHow to Return One Touch to Factory Default Settings How To Operate The MachineHow to Move the Machine Without Power see figure Seat Adjustment StandardHow to Read the Recovery Full Indicator see , B How to Read the Battery Meter see , aHow to Read the Solution Empty Indicator see , a How to Operate the Brush Pressure How to Operate the Squeegee and the Vacuum MotorHow to Operate the Solution Flow How to Fill the Solution Tank How to Operate the Forward / Reverse Switch see figureStarting to clean, put a minimum Recovery tank. Never USE PureDo These Procedures When You Begin Your Work Period To traverse the machine follow this procedureHow To Operate the Machine Do These Procedures When You End Your Work Period How to Clean a Very Dirty FloorSolutions when preforming the steps Use gloves to protect your handsContaminants that will damage Tap water may containBatteries. Batteries must be Refilled with distilled water onlyMake sure that the tank is empty first MaintenanceCleaning the Recovery Tank and Filter Manually Draining the Solution Tank Cleaning the Solution Tank and FilterVac Assisted Solution Tank Drain Squeegee MaintenanceCleaning the Vacuum Hoses Rear Squeegee Blade ReplacementHOW to Correct Problems in the Machine Cause Action Cause Action Accessories and Options Page 71274A SectionClarketechnology Final Assembly Drawing 10/06Qty Description Rotary Cyl Boost Final Assembly Parts List 10/06Scrubtec R 571 Main Frame Assembly Drawing Rotary 9/06 Drawing#11098ADescription Qty Main Frame Assembly Parts List Rotary 5/07 Drawing#11098AClarketechnology Scrubtec R 571C Main Frame Assembly Drawing 9/06 Drawing#10949SMain Frame Assembly Parts List 9/06 Drawing#10949S Clarketechnology Scrubtec Boost R Main Frame Assembly Drawing 3/08 Drawing#11107AMain Frame Assembly Parts List 3/08 Drawing#11107A Optional Side Squeegee Lift Assembly Drawing 5/05 Optional Side Squeegee Lift Assembly Parts List 5/05 Scrubtec R 571, 586, 571 C, Boost R 1611 18, 18A Clarketechnology Clarketechnology Clarketechnology Clarketechnology Clarketechnology 3130 Steering Column Assembly Drawing 5/07 Drawing # 11087BSteering Column Assembly Parts List 5/07 Drawing # 11087B 1A, 1B, 1C 1A, 1B, 1C 2 3 4 20 19 18 17 Assembled View Cylindrical Head Assembly Drawing 5/05 Drawing#10962ACylindrical Head Assembly Parts List 3/05 Drawing#10962A Boost Head Assembly Drawing 10/06 Drawing#11103A Boost Head Assembly Drawing 6/07 Drawing#11103A Squeegee Assembly Drawing 3/08 Drawing # 10802A 104cm Qty Optional Not supplied with machine 99cmRef. # Description Qty Scrubtec R 571 Clarketechnology 6 5 Pages Electrical Connection Diagram 9/06Electrical Connection Diagram 9/06 Clarketechnology Clarketechnology Clarketechnology Clarketechnology Page Nilfisk-ALTO Division of Nilfisk-Advance A/S Norway Clarke Technology Limited U.S. Warranty
Related manuals
Manual 76 pages 18.86 Kb

BOOST R, R 571, R 586, 571 C, SCRUBTEC R 571 specifications

Nilfisk-ALTO has long been recognized for its commitment to delivering high-quality cleaning solutions, and the Nilfisk-ALTO 586, 571, R 571 C, SCRUBTEC R 586, and SCRUBTEC R 571 models exemplify this dedication. These compact and efficient scrubbers are designed for effective cleaning in various environments, making them suitable for both industrial and commercial applications.

The Nilfisk-ALTO 586 and SCRUBTEC R 586 models feature advanced scrubbing technology, providing users with exceptional cleaning results. They are equipped with a highly efficient brush system that can adapt to different floor surfaces, ensuring optimal cleaning performance whether in retail spaces, warehouses, or manufacturing facilities. The unique brush design simplifies the replacement process, allowing operators to switch brushes quickly and easily.

Among their key characteristics is the ability to adjust the water flow and detergent dose to suit the specific cleaning requirements. This contributes to sustainability, as it minimizes water and detergent waste while maximizing cleaning efficacy. Additionally, their ergonomic design promotes user comfort during operation, reducing fatigue during extended cleaning tasks.

The SCRUBTEC R 571 and R 571 C models bring technological advancements, including a patented electronic control system that manages all aspects of the cleaning process. This system allows users to monitor performance metrics in real-time, providing valuable insights into efficiency and usage patterns. Integrated with a large capacity solution tank, these machines can sustain longer cleaning cycles without frequent refills, making them ideal for larger areas.

Another notable feature is the ultra-compact design of these models, which facilitates maneuverability in tight spaces. Their low profile and slim design allow operators to access hard-to-reach areas, ensuring comprehensive cleaning results. Furthermore, the machines are equipped with advanced noise reduction technology, making them suitable for use in noise-sensitive environments.

Overall, the Nilfisk-ALTO 586, 571, R 571 C, SCRUBTEC R 586, and SCRUBTEC R 571 smoothie’s state-of-the-art features and technologies offer exceptional cleaning efficiency. Their operational flexibility, coupled with user-friendly controls, positions them as an ideal choice for businesses looking to invest in reliable and effective floor cleaning solutions. With Nilfisk-ALTO, users can count on superior performance and durability built into every model.
Top Page Image Contents