Nilfisk-ALTO R 571 C, SCRUBTEC R 586, SCRUBTEC R 571, BOOST R manual Machine Control Panel

Page 8

Machine Control Panel

On/Off Key Switch (See figure 1, Item D)

The key switch turns “ON” the power to the control panel. “O” is the “OFF” and “I” is the “ON”.

Brush Up/Down Switch (See figure 1, Item A) To lower brush head, push the brush switch in the down (+) position. To lower the brush head to maxi- mum brush pressure, continue to hold the switch in the down (+) position until the travel stops. The brush motors will start and solution will flow (provided the solution is turned “ON”) when the machine begins to traverse. To raise the brush head, push the brush switch in the up (-) position until the brush head travel stops or desired position is reached.

Squeegee Up/Down Switch (See figure 1, Item B) The squeegee switch is used to raise and lower the squeegee and to turn on and off the vacuum motor. The vacuum motor is turned on when the switch is placed in the middle or lower position. NOTE: When the squeegee switch is placed in the lower position, the vacuum motor will turn on.

To raise the squeegee, place the switch in either the middle or up position. The middle position is used for one touch control. The vacuum motor will stop, after a short delay, when the switch is placed in the up position.

Hour Meter (See figure 1, Item E)

The hour meter is located on the front display. You must toggle screens using LCD display button. The hour meter indicates the number of hours the machine has operated. It displays brush motor, vacuum motor, traverse motor and total key on times.

Battery Meter (See figure 1, Item F)

The battery meter indicates the relative charge on the battery pack. The battery meter is located on screen 1 on the front display. See page 7.

Solution Flow Control (See figure 1, Item C)

The solution flow switch regulates the flow of chemical solution to the floor. To increase the flow, toggle (+). To decrease the flow, toggle (-). To shut off the solution, toggle - until no indicators are visible on display. NOTE: DO NOT run dry!

NOTE: No solution will flow when the machine does not traverse.

Circuit Breakers

The circuit breaker reset buttons are located on the back side of the front cover below front display. The breakers are as follows:

Item A - Main (5 amp)

Item B - Key Switch (5 amp)

E, F

AD

E

C

B

Figure 1

Page -8-

CLARKE TECHNOLOGY Operator's Manual - SCRUBTEC R Manual Steering

Image 8
Contents Operators Manual Table of Contents Operator Safety Instructions Page Introduction & Machine Specifications IntroductionSymbols Used On Scrubtec R Readoperators Manualbeforeoperating Thismachine RiskoffireDisplay Screens For Scrubtec R SCREEN1Machine Control Panel Machine Controls and Features Recovery Tank FloatReverse Alarm TraverseHow To Prepare the Machine For Operation How To Handle the Packed MachineHow to Unpack the Machine How to Install the BatteriesCorrect Fill Shown with Optional Chemical Mixing Sytem Level Indicators for the Charge of the Batteries How To Install the SqueegeeHow To Change or Rotate Brushes on Cylindrical Brush Head How To Install The Brush Or Pad on the Boost machine How To Remove The Brush Or Pad on the Boost machineHow To Operate The Machine How to Return One Touch to Factory Default SettingsHow to Move the Machine Without Power see figure Seat Adjustment StandardHow to Read the Recovery Full Indicator see , B How to Read the Battery Meter see , aHow to Read the Solution Empty Indicator see , a How to Operate the Brush Pressure How to Operate the Squeegee and the Vacuum MotorHow to Operate the Solution Flow How to Operate the Forward / Reverse Switch see figure How to Fill the Solution TankStarting to clean, put a minimum Recovery tank. Never USE PureTo traverse the machine follow this procedure Do These Procedures When You Begin Your Work PeriodHow To Operate the Machine How to Clean a Very Dirty Floor Do These Procedures When You End Your Work PeriodSolutions when preforming the steps Use gloves to protect your handsTap water may contain Contaminants that will damageBatteries. Batteries must be Refilled with distilled water onlyMake sure that the tank is empty first MaintenanceCleaning the Recovery Tank and Filter Cleaning the Solution Tank and Filter Manually Draining the Solution TankVac Assisted Solution Tank Drain Squeegee MaintenanceRear Squeegee Blade Replacement Cleaning the Vacuum HosesHOW to Correct Problems in the Machine Cause Action Cause Action Accessories and Options Page Section 71274AFinal Assembly Drawing 10/06 ClarketechnologyFinal Assembly Parts List 10/06 Qty Description Rotary Cyl BoostMain Frame Assembly Drawing Rotary 9/06 Drawing#11098A Scrubtec R 571Main Frame Assembly Parts List Rotary 5/07 Drawing#11098A Description QtyMain Frame Assembly Drawing 9/06 Drawing#10949S Clarketechnology Scrubtec R 571CMain Frame Assembly Parts List 9/06 Drawing#10949S Main Frame Assembly Drawing 3/08 Drawing#11107A Clarketechnology Scrubtec Boost RMain Frame Assembly Parts List 3/08 Drawing#11107A Optional Side Squeegee Lift Assembly Drawing 5/05 Optional Side Squeegee Lift Assembly Parts List 5/05 Scrubtec R 571, 586, 571 C, Boost R 1611 18, 18A Clarketechnology Clarketechnology Clarketechnology Clarketechnology Clarketechnology Steering Column Assembly Drawing 5/07 Drawing # 11087B 3130Steering Column Assembly Parts List 5/07 Drawing # 11087B 1A, 1B, 1C 1A, 1B, 1C 2 3 4 20 19 18 17 Cylindrical Head Assembly Drawing 5/05 Drawing#10962A Assembled ViewCylindrical Head Assembly Parts List 3/05 Drawing#10962A Boost Head Assembly Drawing 10/06 Drawing#11103A Boost Head Assembly Drawing 6/07 Drawing#11103A Squeegee Assembly Drawing 3/08 Drawing # 10802A 104cm Qty Optional Not supplied with machine 99cmRef. # Description Qty Scrubtec R 571 Clarketechnology 6 5 Electrical Connection Diagram 9/06 PagesElectrical Connection Diagram 9/06 Clarketechnology Clarketechnology Clarketechnology Clarketechnology Page Nilfisk-ALTO Division of Nilfisk-Advance A/S Norway Clarke Technology Limited U.S. Warranty
Related manuals
Manual 76 pages 18.86 Kb

BOOST R, R 571, R 586, 571 C, SCRUBTEC R 571 specifications

Nilfisk-ALTO has long been recognized for its commitment to delivering high-quality cleaning solutions, and the Nilfisk-ALTO 586, 571, R 571 C, SCRUBTEC R 586, and SCRUBTEC R 571 models exemplify this dedication. These compact and efficient scrubbers are designed for effective cleaning in various environments, making them suitable for both industrial and commercial applications.

The Nilfisk-ALTO 586 and SCRUBTEC R 586 models feature advanced scrubbing technology, providing users with exceptional cleaning results. They are equipped with a highly efficient brush system that can adapt to different floor surfaces, ensuring optimal cleaning performance whether in retail spaces, warehouses, or manufacturing facilities. The unique brush design simplifies the replacement process, allowing operators to switch brushes quickly and easily.

Among their key characteristics is the ability to adjust the water flow and detergent dose to suit the specific cleaning requirements. This contributes to sustainability, as it minimizes water and detergent waste while maximizing cleaning efficacy. Additionally, their ergonomic design promotes user comfort during operation, reducing fatigue during extended cleaning tasks.

The SCRUBTEC R 571 and R 571 C models bring technological advancements, including a patented electronic control system that manages all aspects of the cleaning process. This system allows users to monitor performance metrics in real-time, providing valuable insights into efficiency and usage patterns. Integrated with a large capacity solution tank, these machines can sustain longer cleaning cycles without frequent refills, making them ideal for larger areas.

Another notable feature is the ultra-compact design of these models, which facilitates maneuverability in tight spaces. Their low profile and slim design allow operators to access hard-to-reach areas, ensuring comprehensive cleaning results. Furthermore, the machines are equipped with advanced noise reduction technology, making them suitable for use in noise-sensitive environments.

Overall, the Nilfisk-ALTO 586, 571, R 571 C, SCRUBTEC R 586, and SCRUBTEC R 571 smoothie’s state-of-the-art features and technologies offer exceptional cleaning efficiency. Their operational flexibility, coupled with user-friendly controls, positions them as an ideal choice for businesses looking to invest in reliable and effective floor cleaning solutions. With Nilfisk-ALTO, users can count on superior performance and durability built into every model.