Auxiliary functions
Auxiliary Function Selection Buttons Select the required auxiliary functions before starting the Programme.
CSome combinations cannot be selected together. (Ex.:
Warning signal on the selected auxiliary function will light up.
Auxiliary function selection
If an auxiliary function that should not be selected together with a previously selected function is chosen, the first selected function will be cancelled and the last auxiliary function selection will remain active.
(Ex.: If you want to select
Auxiliary function that is not compatible with the Programme cannot be selected. (see, “Programme Selection Table”)
CAuxiliary function buttons may differ according to the model of your machine.
• Prewash
A
C
• Quick Wash
This function can be used for “Cottons” and “Synthetics” Programmes. It decreases the washing times for lightly soiled laundries and also the number of rinsing steps.
• Rinse Plus
With this function, you can increase the number of current rinsing steps. Thus, sensitive skins’ risk of being affected by the remainder detergent on the clothes will be decreased.
•
With this function, drum movement will be lessened to prevent creasing and spinning speed is limited. In addition, washing is carried out at a higher water
level.
CUse this function for delicate laundries that crease easily.
CWhenever you select this auxiliary function, load your machine with half of the maximum laundry specified in the Programme table.
• No Heat
If you wish to wash your clothes in cold water, you can use this Programme.
Time display
The display shows the time remaining for the Programme to complete while a Programme is running. Time is displayed in hours and minutes as “01:30”.
CProgramme duration may differ from the values in the consumption table subject to the changes in the water pressure, water hardness and temperature, ambient temperature, type and amount of laundry, auxiliary functions selected, and changes in the supply voltage.
Time delay
With the “Time delay” function you can delay the Programme start up to 24 hours. Time delay can be set with steps of one hour for the first three hours and with steps of three hours for the remainder (1, 2, 3, 6, 9, …24).
CDo not use liquid detergent when you set time delay! There is the risk of staining of the clothes.
1.Open the loading door, place the laundry inside and fill detergent drawer.
2.Set the washing Programme, spin speed and, if required, select the auxiliary functions.
3.Pres “Time Delay” button to adjust the desired time.
4.Press “Start/Pause/Cancel” button. The time delay will start to count down. The “:” in the middle of the displayed time delay will start flashing.
CMore laundry may be loaded during the time delay period.
5.At the end of countdown process, “:” will light up continuously, “Ready” light
51
EN