•An incorrect option selection has been made: this is indicated by the message Err when a function incompatible with the current programme is selected.
•An alarm code indicates a fault in the machine operation (see page 31, "Something Not Working").
E20
11 Programme phase indicator lights
When you select a programme, the lights relevant to the phases that form the programme light up.
After you have started the programme, only the light relevant to the phase that is currently being carried out will remain lit.
When the washing or drying programme has finished, the “End” light comes on and a flashing zero appears on the display. The light of the ‘Start/Pause is off.
Prewash
Wash
Rinse
Rinse hold
Drain
Spin
Drying
End
Important!
If you turn the programme selector dial to another programme when the machine is working, all the lights of the programme progress display will flash for about 2 seconds but the machine will not perform the new selected programme.
12 Programme selector dial
The programme selector dial is divided into the following sections:
•Cottons,
•Synthetics,
•Delicates
•Wool / Hand washing
•Special programmes from “Soak 30°” to “30 Minute wash”
•Reset programme “Off”
|
|
|
|
|
|
|
|
|
|
|
|
| 30 Minute wash |
|
| 90° |
|
|
|
|
|
| Off | Cottons |
|
| |||
|
|
| Drain | 60° |
|
| |||
|
|
| Spin |
|
| Economy 60° |
|
|
|
|
|
| Softeners |
|
| Economy 40° |
|
|
|
|
|
| Rinse |
|
| 40° |
|
|
|
|
|
| Soak 30° |
|
| 30° |
|
|
|
|
| Wool | Cold |
|
| Drying |
|
|
|
|
| 30° |
|
| 60° |
|
|
| |
|
|
|
| Synthetics |
|
| |||
|
| 40° |
|
| Economy 40° |
|
| ||
|
|
| Delicates 30° |
|
| 40° |
|
|
|
|
|
| Delicates 40° |
|
| Easy iron 40° |
|
|
|
|
|
|
|
|
| Drying |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The selector dial can be turned either clockwise or anticlockwise to select the required wash and drying programme .
“Economy” position corresponds to an ENERGY SAVING programme and “Cold” to a cold wash.
Before setting the dial to any position ensure that the machine is turned to the “Off” position.
Important!
At the end of the programme the selector dial must be turned to position “Off”.
17