John Lewis JLBIWD 1400 instruction manual Something Not Working

Page 31

Something Not Working

Certain problems are due to lack of simple maintenance or oversights, which can be solved easily without calling out an engineer. Before contacting your local Service Force Centre (see page 33 , Service and Spare Parts), please carry out the checks listed below.

IMPORTANT: if you call out an engineer to a fault listed below, or to repair a fault caused by incorrect use or installation, a charge will be made even if the appliance is under guarantee.

During machine operation it is possible that the “End” light starts to flash, one of the following alarm codes appears on the display and in the same time the buzzer sounds:

-E10 : problem with the water supply

-E20 : problem with water draining

-E40 : door open

Once the problem has been eliminated, press the “Start/Pause” button to restart the programme. If after all checks, the problem persists, contact your local Service Force Centre.

Symptom

Solution

 

 

 

The machine does not start

The door has not been closed. (E40 )

 

The plug is not properly inserted in the power socket.

 

There is no supply at the socket.

 

The main fuse or the fuse in the plug has blown.

 

The “Start/Pause” button has not been depressed.

 

The “Delay start” option has been selected.

 

 

 

The machine does not fill

The water tap is closed. (E10 )

 

The filter in the inlet hose is blocked. (E10 )

 

The inlet hose may be squashed or kinked. (E10)

 

The door has not been closed. (E40)

 

 

 

The machine fills then empties

The end of the drain hose is too low.

immediately

The end of the drain hose is submerged in water.

 

There is no vent in the end of the drain hose.

 

 

 

The machine does not empty

The drain hose may be squashed or kinked. (E20)

and/or does not spin

The drain filter may be blocked. (E20)

 

The “Rinse hold” option has been selected.

 

The drainage system pipes are blocked.

 

The programme “Soak 30°”, which ends with water left in the tub,

 

 

has been selected.

 

The wash load is unbalanced: redistribute the clothes inside the drum

 

 

to allow the machine to spin.

 

 

 

There is water on the floor

Too much detergent or unsuitable detergent has been used (creates

 

 

too much foam).

 

Check whether there are any leaks from the inlet hose fittings. It is not

 

 

always easy to see this as the water runs down the hose; check to see

 

 

if it is damp.

 

The drain hose may be damaged or not securely positioned.

 

The filter has not been fully screwed in after cleaning.

 

 

 

31

Image 31
Contents Jlbiwd Service InstallationChild Safety Maintenance and CleaningContents Environmental Information Materials marked with the symbol are recyclableYour New Washer-Dryer Ecological hintsPrewash Main wash Fabric softener Child safety featureDescription of the Appliance Detergent dispenser drawerDrying Installation InstructionsTechnical Specifications WashingUnpacking Installation on a Suspended FloorQualified plumber Hinges Preparation and assembly of the doorBuilding-in DoorCounter-magnet Mounting the doorDrill four fixing holes see Fig. G Appliance must be connected to a cold water supply Water inletInto a drainage standpipe Water drainageOnto a sink outlet spigot Electrical connection LevellingSpecial conditions Interest of the environmentBlue- Neutral Brown- Live Permanent connectionWith the current electrical regulations Spin button Control PanelDetergent dispenser drawer Mains-on light On/Off buttonStart/Pause button Delay start buttonAutomatic Dry button Time dry buttonExample Selection of drying time in minutesProgramme selector dial Programme phase indicator lightsEasy iron Programme informationMeasure out the detergent Switch the machine onOperating Sequence Load the laundrySelect the desired options Select the Delay startHow to change an option or a programme during its cycle Select the spin speed or the Rinse hold optionDraining only or Draining and spin on How to interrupt a programmeEnd of programme Level of the water is not high Drum is not turningPress the Start/Pause button to start the programme Drying900 r.p.m. for Cottons & Synthetics with electronic drying Bath robe Washing and Drying Hints1000g = 1 kg SheetImportant Notes Wash Care SymbolsWashing programmes Soak Off ResetProgramme Consumptions Energy Water Time Description KWhDegree Type of fabric Max. load Spin speed Drying time Mins Drying ProgrammesMaintenance and Cleaning Emergency emptying out Cleaning the water inlet filterSomething Not Working Door will not open Unsatisfactory washing resultsMachine vibrates when Spinning0870 01 132 984

JLBIWD 1400 specifications

The John Lewis JLBIWD 1400 is a highly efficient and versatile washing machine that meets the demands of modern households. This integrated washer dryer combines practicality with advanced technology, making it a popular choice among consumers seeking a reliable laundry solution.

One of the standout features of the JLBIWD 1400 is its impressive capacity. With a washing load of up to 8 kg and a drying load of 5 kg, this machine is designed to handle large volumes of laundry, making it suitable for families or those with busy lifestyles. Its 1400rpm spin speed ensures that clothes come out damp but not soaking wet, reducing drying time significantly.

The JLBIWD 1400 incorporates a variety of washing programs tailored for different fabric types and user preferences. From gentle cycles for delicate items to powerful settings for heavily soiled clothing, the machine offers flexibility to cater to individual needs. The quick wash option is an added convenience, allowing users to clean small loads in as little as 15 minutes.

Another key characteristic of the John Lewis JLBIWD 1400 is its energy efficiency. With an energy rating of A, this washer dryer helps reduce electricity bills while minimizing environmental impact. The machine is designed to use water and energy judiciously without compromising performance.

In terms of technology, the JLBIWD 1400 is equipped with an intuitive control panel that allows users to select programs easily. The digital display provides clear feedback on the selected washing cycle and remaining time, enhancing usability. Additionally, the delay start feature offers the convenience of scheduling laundry for a more suitable time, such as during off-peak energy hours.

Safety features are also paramount, and this model includes a child lock function to prevent accidental operation. The machine is built with robust materials designed for longevity and comes with a warranty, providing peace of mind to consumers.

The John Lewis JLBIWD 1400 combines features, technology, and efficiency in one sleek package. With its large capacity, diverse washing programs, and user-friendly interface, it stands out as a reliable appliance that simplifies the laundry process for households everywhere.