6.Select the spin speed or the “Rinse hold” option
Press the “Spin” button repeatedly in order to select the desired spin speed or the “Rinse hold” option. If you select the “Rinse hold” option, the machine will stop at the end of the programme with the water still in the tub. The relevant light will light up.
1400
900
700
500 Rinse hold
Spin
The selected delay time value (up to 23 hours) will appear on the display for 3 seconds, then the duration of the programme will appear again.
Delay
start
During this period it is possible to load other laundry: press the “Start/Pause” button. Open the door. Load the laundry. Close the door and press the “Start/Pause” button again.
7. Select the desired options
If your laundry is very dirty, it may be advisable to select the “Prewash” option.
If your laundry is only slightly soiled, select the “Quick” option.
If you wish the laundry to undergo an extra rinse, select the “Extra Rinse” option.
The relevant light illuminates.
Extra
Prewash Quick rinse
8. Select the “Delay start”
Before you start the programme, if you wish the start to be delayed, press the “Delay start” button repeatedly, or keep it pressed, to select the desired delay.
9. Start the programme
Press the “Start/Pause” button. The relevant light will stop flashing, and only the light relevant to the phase that is in progress will remain lit. The machine starts operating.
If you have chosen a delayed start, the washer dryer will begin the countdown.
The display will show the duration of the programme or the selected delay.
10.How to change an option or a programme during its cycle
It is possible to change any option before the programme carries it out.
Before you make any change, you must pause the machine by pressing the “Start/Pause” button.
Changing a running programme is possible only by
resetting it.
Turn the programme selector dial to “Off” and then to the new programme position.
Start the new programme by depressing the
“Start/Pause” button. The washing water in the tub will not emptied out.
20