GE Monogram ZBD6605 owner manual Removing Cleaning Spray Arms Glass Trap, Pull up to remove

Page 19

Removing

and Cleaning

the Spray

Arms and

Glass Trap

Periodically, remove and clean the spray arms to make sure that none of the nozzles have become blocked.

To remove the lower spray arm, grasp the center of the spray arm and pull upward; it will unclip. When replacing, make sure the spray arm is fully seated and spins.

The plastic cone on the underside of the spray arm can be detached by unscrewing it counterclockwise.

To remove the upper spray arm, carefully unscrew the spray arm from the plastic tower. To achieve this, hold the inner tower steady and unscrew the spray arm clockwise. To replace the spray arm, carefully screw the spray arm counterclockwise onto the inner tower.

To clean the upper and lower spray arms, rinse them under running water and make sure spray nozzles are clear.

The glass trap is located in the stainless steel filter at the base of your Chef’s Washer. The glass trap is used to collect larger food items and other foreign objects, which may be too big to pass through the drain pump. For best wash performance, check the glass trap occasionally.

To remove the glass trap, twist counterclockwise, rotate the glass trap and lift. To clean the glass trap, empty and rinse thoroughly. To replace, reverse these steps, making sure the glass trap locks into place.

Pull up to remove

Rotate counterclockwise to remove cone

Rotate counterclockwise and lift to remove glass trap

19

Image 19
Contents Chef’s Washer Introduction ContentsIf you received Damaged Chef’s Washer Before using your Chef’s WasherIf you Need service Write down the model & serial numbersAvant de jeter votre vieux lave-vaisselle du chef Before You Throw Away Your Old Chef’s Washer’HYDROGÈNE EST UN GAZ Explosif Water Heater SafetyProper Installation and Maintenance When Using Your CHEF’S Washer Heavy Duty Normal Wash Light Wash Speed Wash Rinse only Control SettingsControl Panel ZBD6605 ZBD6605Operation ZBD6605 Start a wash loadZBD6905 Control Panel ZBD6905Sani Control Panel/Operation ZBD6905Normal HighZBD7005 & ZBD7105 Control Panel ZBD7005 & ZBD7105HI Temp Control Panel/Operation ZBD7005 & ZBD7105 Control Settings Start a Wash LoadCycle Chart Detergent Usage Guide Powder or Liquid Features ZBD6605, ZBD6905, ZBD7005, ZBD7105Use a Rinse Agent Using the Chef’s WasherDetergents Upper Wash Tower Adjusting Upper Rack HeightLoading the Racks Upper RackLower Rack Silverware Utensil BasketExterior Interior Protect Against Freezing Care and CleaningAir Gap Pull up to remove Removing Cleaning Spray Arms Glass TrapMicro-mesh filter Wash FiltersWater Fill Level Before You Call For Service Questions? Use this problem solverSuds in the tub Problem Possible Cause What to doDishes do not dry All cycle status indicatorsBlack or gray marks On dishesWater does not empty Canada, call Consumer ServicesFrom the Date Original Purchase Warranty for customers in the USAONE-YEAR Warranty for customers in Canada Chef’s Washer Chef’s Washer Registration Ownership Product Consumer Consumer Product Ownership Registration