GE Monogram Control Settings, Control Panel ZBD6605, Normal High Temp Sanitize Heat DRY

Page 8
Provides a wash and rinse with water temperatures up to 125°F (51°C) in LIGHT WASH, 135°F (57°C) in the NORMAL WASH cycle and 155°F (68°C) in HEAVY DUTY.
Provides a wash and rinse with water temperatures up to 160°F (71°C) in LIGHT WASH, NORMAL WASH and HEAVY DUTY. Not available for
SPEED WASH, LIGHT WASH or RINSE ONLY cycles.
Provides a sanitizing wash and rinse with water temperatures up to 160°F (71°C) in LIGHT WASH and 171°F (77°C) in NORMAL WASH and HEAVY DUTY. Not available for SPEED WASH or RINSE ONLY cycles. At the end of the cycle, the HEAT OPTIONS light will illuminate to indicate that the sanitization conditions have been met.
NSF INTERNATIONAL
Meets NSF Protocol for Performance of Domestic Spray-Type Pots and Pans Washing Machines (NSF Protocol P180) Requirements for cleaning and sanitization of cookware.
For pans or cookware with dried-on or baked-on soils. This cycle may not remove some burned-on foods.
For loads of everyday cookware with medium soils. NOTE: For heavily soiled cookware, choose NORMAL WASH plus HIGH TEMP water temperature option.
For lightly soiled cookware.
For recently used, lightly soiled cookware to be washed in a short time. Provides a wash with temperatures of up to 125°F (51°C).
For rinsing partial loads that will be washed later. Do not use detergent with this cycle.

You can locate your model number on the inside upper tub flange. Throughout this manual, features and appearance may var y from your model.

Control

Settings

Control Panel – ZBD6605

Chef’s Washer

ZBD6605

 

1

2

1.WASH CYCLES Knob–Use to select the desired wash cycle based on dishware and soil level.

HEAVY DUTY

NORMAL WASH

LIGHT WASH

SPEED WASH

RINSE ONLY

2. HEAT OPTIONS Knob–Used to select water temperature and drying options.

NORMAL

HIGH TEMP.

SANITIZE

R

E

S

I

D

E

N

T

I

 

A

 

L

NOTE: NSF certified residential dishwashers are not intended for licensed food establishments.

HEAT DRY

When selected, turns the drying heater on for fast drying. The option will

 

extend the cycle by 30 minutes. When this option is NOT selected, the

 

fan will turn on to dry your dishes without added heat–energy is saved.

8

HEAT DRY is not available on RINSE ONLY.

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Chef’s Washer Contents IntroductionBefore using your Chef’s Washer If you Need serviceWrite down the model & serial numbers If you received Damaged Chef’s WasherBefore You Throw Away Your Old Chef’s Washer Avant de jeter votre vieux lave-vaisselle du chefWater Heater Safety ’HYDROGÈNE EST UN GAZ ExplosifProper Installation and Maintenance When Using Your CHEF’S Washer Control Settings Control Panel ZBD6605ZBD6605 Heavy Duty Normal Wash Light Wash Speed Wash Rinse onlyStart a wash load Operation ZBD6605Control Panel ZBD6905 ZBD6905Control Panel/Operation ZBD6905 NormalHigh SaniHI Temp Control Panel ZBD7005 & ZBD7105ZBD7005 & ZBD7105 Control Settings Start a Wash Load Control Panel/Operation ZBD7005 & ZBD7105Features ZBD6605, ZBD6905, ZBD7005, ZBD7105 Cycle Chart Detergent Usage Guide Powder or LiquidDetergents Using the Chef’s WasherUse a Rinse Agent Adjusting Upper Rack Height Loading the RacksUpper Rack Upper Wash TowerSilverware Utensil Basket Lower RackAir Gap Care and CleaningExterior Interior Protect Against Freezing Removing Cleaning Spray Arms Glass Trap Pull up to removeWash Filters Micro-mesh filterWater Fill Level Questions? Use this problem solver Before You Call For ServiceProblem Possible Cause What to do Suds in the tubAll cycle status indicators Black or gray marksOn dishes Dishes do not dryWater does not empty Consumer Services Canada, callONE-YEAR Warranty for customers in the USAFrom the Date Original Purchase Warranty for customers in Canada Chef’s Washer Chef’s Washer Registration Ownership Product Consumer Consumer Product Ownership Registration
Top Page Image Contents