ENGLISH | 12 |
2 | Pour fabric softener |
| into the compart- |
ment marked 
(must not exceed the «MAX» mark in the drawer).
Close the drawer gently
Select the required programme by turning the programme selector dial (1)
The appliance is now switched on. The indi- cator light of button 5 starts to blink.
At the end of the programme the selector di- al must be turned to position O, to switch the appliance off.
For the description of each wash cycle, the compatibility among the washing
programmes and the options, consult the chapter «Washing Programmes».
Caution! If you turn the programme selector dial to another programme
when the appliance is working, the red indicator light of button 5 will blink 3 times and the message Err appears on the display to indicate a wrong selection. The appliance will not perform the new selected programme.
Reduce the spin speed or select the No Spin or Rinse Hold by pressing button 2
By selecting a programme, the appliance proposes automatically the maximum spin speed provided for that programme.
Press button 2 repeatedly to change the spin speed, if you want your laundry to be spun at a different speed. The relevant indicator light illuminates.
Select the available options by pressing buttons 6, 7, 8 and 9
Depending on the programme, different functions can be combined. These must be selected after choosing the desired pro- gramme and before starting the programme.
When these buttons are pressed, the corre- sponding indicator lights illuminate. When they are pressed again, the indicator lights go out. If an incorrect option is selected, the integrated red indicator light of the button 5 flashes for 3 times and the message Err ap- pears on the display.
For the compatibility among the wash- ing programmes and the options see
chapter «Washing Programmes».
Select the Delay Start by pressing button 4
Before you start the programme, if you wish to delay the start, press this button to select the desired delay.
The selected delay time value will appear on the display for a few seconds, then the dura- tion of the programme will appear again.
You must select this option after you have set the programme and before you start the pro- gramme.
You can cancel or modify the delay time at any moment, before you press button 5. Selecting the delay start :
1.Select the programme and the required options.
2.Select the delay start by pressing button 4.
3.Press button 5:
–the machine starts its hourly count- down.
–the programme will start after the se- lected delay has expired.
Cancelling the Delay Start after having star- ted the programme:
1.Set the washing machine to PAUSE by pressing button 5.
2.Press button 4 once. On the display will appear '.
3.Press button 5 again to start the pro- gramme.