ENGLISH | 22 |
Problem | Possible cause | Solution |
| An option or a programme that | Select the draining or spinning pro- |
| ends with the water still in the tub or | gramme. |
| a that eliminates all the spinning |
|
| phases has been selected. |
|
The appliance |
| Close the door firmly. |
door is open or |
|
|
not closed cor- |
|
|
rectly. |
|
|
| The plug is not properly inserted in | Insert the plug into the power sock- |
| the power socket. | et. |
| There is no power at the socket. | Please check your domestic electri- |
|
| cal installation. |
| The main fuse or the fuse in a plug | Replace the fuse. |
The appliance | has blown. |
|
does not start: | The programme selector dial is not | Please turn the selector dial and |
| correctly positioned and the button | press the button 5 again. |
| 5 has not been pressed. |
|
| The delay start has been selected. | If the laundry are to be washed im- |
|
| mediately, cancel the delay start. |
| The Child Lock function is activated. | Deactivate the Child Lock function. |
| The electronic unbalance detection | Redistribute the load manually or |
| device has cut in because the laun- | load more laundry and select the |
| dry is not evenly distributed in the | spin programme. |
The appliance | drum. The laundry is redistributed |
|
by reverse rotation of the drum. This |
| |
spinning phase |
| |
may happen several times before |
| |
starts late or |
| |
the unbalance disappears and nor- |
| |
does not start: |
| |
mal spinning can resume. If, after 10 |
| |
|
| |
| minutes, the laundry is still not even- |
|
| ly distributed in the drum, the appli- |
|
| ance will not spin. |
|
| Too much detergent or unsuitable | Reduce the detergent quantity or |
| detergent (creates too much foam) | use another one. |
| has been used. |
|
| Check whether there are any leaks | Check the water inlet hose connec- |
There is water | from one of the inlet hose fittings. It | tion. |
is not always easy to see this as the |
| |
on the floor: |
| |
water runs down the hose; check to |
| |
| see if it is damp. |
|
| The drain or inlet hose is damaged. | Replace it with a new one (check |
|
| with the After Sales Service the right |
|
| spare part number). |