ENGLISH | 20 |
10 | Close the pump |
| door. |
Cleaning the water inlet filters
If the appliance takes long to fill with water or doesn't fill, the starting button indicator light blinks in red. Check if the water inlet fil- ters are blocked (see chapter "What to do if..." for more details).
Proceed as follows:
1 | • | Turn off the water |
| • | tap. |
| Unscrew the hose | |
|
| from the tap. |
| • Clean the filter in | |
|
| the hose with a |
| • | stiff brush. |
| Screw firmly the | |
|
| inlet hose back |
|
| onto the tap. |
2 |
|
|
•Unscrew the hose from the appliance. Keep a rag nearby because some water may flow.
•Clean the filter in the valve with a stiff brush or with the piece of cloth.
3 | • | Screw the hose |
|
| back to the appli- |
|
| ance turning it to |
|
| the left or the right |
35° | 45° | to suit the installa- |
|
| tion. Tight the |
|
| locknut correctly |
|
| to prevent water |
|
| leaks. |
| • Turn on the water | |
|
| tap. |
The dangers of freezing
If the appliance is exposed to temperatures below 0°C, certain precautions should be taken.
•Turn off the water tap.
•Unscrew the inlet hose.
•Place the end of the emergency emptying hose and that of the inlet hose in a bowl placed on the floor and let water drain out.
•Screw the water inlet hose back on and re- position the emergency emptying hose af- ter having put the cap on again.
•When you intend to start the appliance up again, make sure that the room tempera- ture is above 0°C.
Important! Every time you drain the water through the emergency emptying hose you must pour 2 litres of water into the main wash compartment of the detergent drawer and then run the drain programme. This will activate the ECO VALVE device avoiding that part of the detergent remains unused at next washing.
Emergency emptying out
If the water is not discharged, proceed as fol- lows to empty out the appliance:
•pull out the plug from the power socket;
•close the water tap;
•if necessary, wait until the water has cooled down;
•open the pump door;