ENGLISH | 13 |
•The selected delay can be changed only after selecting the washing pro- gramme again.
•The door will be locked throughout the delay time. If you need to open the door, you must first set the wash- ing machine to PAUSE by pressing button 5 and wait a few minutes be- fore opening the door. After you have closed the door, press the same but- ton again.
•The Delay Start cannot be selected with the draining programme.
Start the programme by pressing button 5
To start the selected programme, press this button; the corresponding green indicator light stops blinking.
The indicator light 3 illuminates to indicate that the appliance starts operating and the door is locked.
If you have chosen a delayed start, the ma- chine will begin the countdown.
If an incorrect option is selected, the message Err appears on the display for
a few seconds and the red indicator light of the button 5 blinks 3 times.
Altering an option or a running programme
It is possible to change some options before the programme carries them out.
Before you make any change, you must PAUSE the appliance by pressing the button 5.
Changing a running programme is possible only by resetting it. Turn the programme se- lector dial to O and then to the new pro- gramme position. Start the new programme by pressing the button 5 again. The washing water in the tub will be not emptied out.
Interrupting a programme
Press the button 5 to interrupt a programme which is running, the corresponding green in- dicator light starts blinking.
Press the button again to restart the pro- gramme.
Cancelling a programme
Turn the selector dial to O to cancel a pro- gramme which is running.
You can select now a new programme.
Opening the door after the programme has started
First set the machine to pause by pressing the button 5.
If the indicator light 3 blinks and after a few minutes goes off, the door can be opened. If the indicator light 3 remains lit, this means that the machine is already heating or that the water level is too high. In any case, do not try to force the door open!
If you cannot open the door but you need to open it, you have to switch the machine off by turning the selector dial to . After a few minutes the door can be opened.
After closing the door, it is necessary to select the programme and options again and to press button 5.
Caution! Pay attention to the water level and temperature!
At the end of the programme
The machine stops automatically. Some acoustic signals sound and a blinking ap- pears on the display, the indicator light of button 5 and the indicator light 3 go off.
If a programme or an option that ends with water left in the tub has been selected, the indicator light 3 remains on and the door is locked to indicate that the water must be emptied out before opening the door.
To empty out the water:
1. Turn the programme selector dial to .
2.Select the draining or spinning pro- gramme.
3.Reduce the spin speed if needed, by pressing button 2.
4.Press button 5.
At the end of the programme, the door is re- leased and can be opened. Turn the pro- gramme selector dial to to switch the ma- chine off.