John Lewis JLWM1403 Electrical connection, Permanent connection, Blue- Neutral Brown- Live

Page 10

It is essential that these appliances are not connected to the surface water drainage system as this water is discharged directly into a river or stream and may cause pollution.

If you require any further advice please contact your local water authority.

Electrical connection

Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person.

WARNING: THIS APPLIANCE MUST BE EARTHED.

The manufacturer declines any liability should this safety measure not be observed.

Should the appliance power supply cableneed to be replaced, this must be carriedout by a Service Force agent (see page 19).

Before switching on, make sure the electricity supply voltage is the same as that indicated on the appliance’s rating plate. The rating plate is located at the top of the rim of the open door.

 

Mod

 

Prod. No

P0042 BD

Ser. No

 

The appliance is supplied with a 13amp plug fitted. In the event of having to change the fuse in the plug supplied, a 13amp ASTA approved (BS1363/A) fuse must be used.

Should the plug need to be replaced for any reason, proceed as described below.

The wires in the mains lead are coloured in accordance with the following code:

Green and Yellow

- Earth

Blue- Neutral

Brown- Live

GREEN & YELLOW

E

 

13 A

N

L

 

BROWN

BLUE

 

 

CORD CLAMP

P1041

 

 

 

If you fit your own plug, the colours of the wires in themains lead of your appliance may not correspond with themarkings identifying the terminals in your plug.

Proceed as follows:

1.The wire coloured green and yellow must be connected to the terminal marked with the letter

«E» or by the earth symbol or coloured green and yellow.

2.The wire coloured blue must be connected to the terminal marked «N» or coloured black.

3.The wire coloured brown must be connected to the terminal marked «L» or coloured red.

4.Upon completion there must be no cut, or stray strands of wire present and the cord clamp must be secure over the outer sheath.

WARNING:

A cut off plug inserted into a 13 amp socket is a serious safety (shock) hazard. Ensure that the cut off plug is disposed of safely.

The power supply cable must be easily accessible after installing the appliance.

Permanent connection

In the case of permanent connection it is necessary that you install a double pole switch between the appliance and the electricity supply (mains), with a minimum gap of 3mm between the switch contacts and of a type suitable for the required load in compliance with the current electrical regulations.

The switch must not break the yellow and green earth cable at any point.

10

Page 9 Page 11
Image 10
Page 9 Page 11
Contents JLWM1202 Spin washing machine JLWM1403 Child Safety InstallationUse Ecological hints Maintenance and Cleaning ServiceMaterials marked with the symbol are recyclable Environmental InformationContents Door locked light Child safety featureDescription of the Appliance Detergent dispenser drawerInstallation Technical SpecificationsPositioning Installation on a Suspended FloorUnpacking PlumbingAppliance must be connected to a cold water supply Water inletWater drainage Into a drainage standpipeInterest of the environment LevellingOnto a sink outlet spigot Permanent connection «E» or by the earth symbol or coloured green and yellowElectrical connection Blue- Neutral Brown- LiveSpin button Control PanelDetergent dispenser drawer Programme selector dial Option buttonsSelecting the delayed start Delay start buttonCancelling the delayed start Display Start/Pause buttonFollowing pieces of information are shown on the display Programme phase indicator lights E20Programme information SoakMeasure out the detergent Switch the machine onLoad the laundry Main wash compartmentSelect the spin speed or the None option Select the Delay startHow to change an option or a programme during its cycle Select the desired optionsEnd of programme How to interrupt a programmeLeave the door ajar in order to air the washing machine Sheet Hints & Tips on Washing1000g = 1 kg Bath robeWash Care Symbols Important NotesWashing programmes Energy Water Time Description Off / ResetProgramme Available Consumptions SoakMaintenance and Cleaning Remove any objects from the pump impeller by rotating it Cleaning the water inlet filterEmergency emptying out Screw the pump cover fully Close the pump doorSomething Not Working Door will not open Machine vibrates whenSpinning Light has gone out132 982 03/06

JLWM1202, JLWM1403 specifications

John Lewis has long been synonymous with quality and reliability in the home appliance market, and the John Lewis JLWM1403 and JLWM1202 washing machines are prime examples of this commitment. Both models combine efficiency, advanced technologies, and user-friendly features, making them excellent choices for modern households.

The JLWM1403 is designed to accommodate larger loads with its 8kg capacity, which is ideal for families or individuals who frequently wash larger items such as bedding. It offers a maximum spin speed of 1400 RPM, ensuring that clothes come out dryer and require less time in the dryer, ultimately saving energy and reducing drying time. This model features a variety of wash programs, including a quick wash option that allows users to clean lightly soiled clothes in just 30 minutes, providing convenience when time is of the essence.

On the other hand, the JLWM1202 is more suitable for smaller spaces or those with lighter laundry needs, featuring a 6kg capacity. Despite its compact size, it does not compromise on performance and also provides a maximum spin speed of 1200 RPM. The JLWM1202 also comes equipped with an array of wash programs, ensuring that every fabric type and dirt level can be addressed efficiently. Its eco setting is particularly noteworthy, optimizing water and energy usage for environmentally conscious consumers.

Both models benefit from the latest washing technologies, including inverter motors that promote quiet and efficient operation. This technology not only reduces noise levels during washing cycles but also contributes to improved energy efficiency. Furthermore, both washing machines come with an A+++ energy rating, which assures users of low running costs and minimal environmental impact, making them both economical and eco-friendly choices.

Another key feature common to both models is their user-friendly interface. The LED display and intuitive controls make selecting wash programs and adjusting settings a straightforward task. Additionally, the delay start function allows users to schedule wash cycles at their convenience.

With excellent build quality and a selection of smart features, the John Lewis JLWM1403 and JLWM1202 washing machines stand out as reliable appliances that cater to different household needs, ensuring laundry day is as efficient and hassle-free as possible.
Top Page Image Contents