John Lewis JLWM1403, JLWM1202 Water inlet, Water drainage, Into a drainage standpipe

Page 8

The appliance has an inlet hose, with female 3/4” BSP thread connector. If this connection is not compatible with the plumbing of the existing installation, a variety of connectors are available from good hardware stores and plumbers merchants to suit most domestic plumbing. Any alteration to your existing plumbing must be carried out by a competent person, or qualified plumber.

Water inlet

Connect the hose to a tap with a 3/4” thread. Always use the hose supplied with the appliance to connect to the water supply.

Do not use previously used hoses for water connection.

P1088

Installation should comply with local water authority and building regulations’ requirements.

The appliance must be connected to a cold water supply.

A minimum water pressure of 50 kPa (0.5 bar) is required for safe operation of the appliance.

If you cannot make the cold water connection direct from the rising mains, you may be able to operate the appliance from your cold water storage system.

There should be a minimum distance of 5.02m

(16.5 ft) between the appliance’s inlet and the bottom of the water storage tank.

Set the hose correctly by loosening the ring nut. After positioning the inlet hose, be sure to tighten the ring nut again to prevent leaks.

P0021

Water drainage

This appliance is designed to be permanently plumbed into your home's drainage system using one of the following methods.

1. Into a drainage standpipe.

Firstly form a hook in the end of the drain hose using the “U” piece” supplied.

“U” piece supplied

P1199

Place the drain hose into your standpipe, which should have an internal diameter of approximately 38mm thus ensuring there is an air break between the drain hose and standpipe.

38 mm (11.2”)

standpipe diameter

30 (12")cm

P1200

When discharging into a standpipe ensure that the top of the standpipe is no more than 90cm (35.4'') and no less than 60cm (23.6'') above floor level.

3 pin

 

60 cm (23.6”)

Max. 90 cm (35.4”)

Min.

 

P1201

 

The drain hose may be extended to a maximum of 4 metres. An additional drain hose and joining piece is available from your local Service Force Centre.

The joining piece must have an internal diameter of 18mm.

If your drain hose looks like this (see below) you do not require the “U” piece”. Just push the hose firmly into the standpipe.

8

Page 7 Page 9
Image 8
Page 7 Page 9
Contents JLWM1202 Spin washing machine JLWM1403 Use InstallationChild Safety Maintenance and Cleaning Service Materials marked with the symbol are recyclableEcological hints Environmental InformationContents Child safety feature Description of the ApplianceDoor locked light Detergent dispenser drawerInstallation Technical SpecificationsInstallation on a Suspended Floor UnpackingPositioning PlumbingWater inlet Water drainageAppliance must be connected to a cold water supply Into a drainage standpipeOnto a sink outlet spigot LevellingInterest of the environment «E» or by the earth symbol or coloured green and yellow Electrical connectionPermanent connection Blue- Neutral Brown- LiveControl Panel Detergent dispenser drawer Programme selector dialSpin button Option buttonsCancelling the delayed start Delay start buttonSelecting the delayed start Following pieces of information are shown on the display Start/Pause buttonDisplay Programme phase indicator lights E20Programme information SoakSwitch the machine on Load the laundryMeasure out the detergent Main wash compartmentSelect the Delay start How to change an option or a programme during its cycleSelect the spin speed or the None option Select the desired optionsLeave the door ajar in order to air the washing machine How to interrupt a programmeEnd of programme Hints & Tips on Washing 1000g = 1 kgSheet Bath robeWash Care Symbols Important NotesWashing programmes Off / Reset Programme Available ConsumptionsEnergy Water Time Description SoakMaintenance and Cleaning Cleaning the water inlet filter Emergency emptying outRemove any objects from the pump impeller by rotating it Screw the pump cover fully Close the pump doorSomething Not Working Machine vibrates when SpinningDoor will not open Light has gone out132 982 03/06

JLWM1202, JLWM1403 specifications

John Lewis has long been synonymous with quality and reliability in the home appliance market, and the John Lewis JLWM1403 and JLWM1202 washing machines are prime examples of this commitment. Both models combine efficiency, advanced technologies, and user-friendly features, making them excellent choices for modern households.

The JLWM1403 is designed to accommodate larger loads with its 8kg capacity, which is ideal for families or individuals who frequently wash larger items such as bedding. It offers a maximum spin speed of 1400 RPM, ensuring that clothes come out dryer and require less time in the dryer, ultimately saving energy and reducing drying time. This model features a variety of wash programs, including a quick wash option that allows users to clean lightly soiled clothes in just 30 minutes, providing convenience when time is of the essence.

On the other hand, the JLWM1202 is more suitable for smaller spaces or those with lighter laundry needs, featuring a 6kg capacity. Despite its compact size, it does not compromise on performance and also provides a maximum spin speed of 1200 RPM. The JLWM1202 also comes equipped with an array of wash programs, ensuring that every fabric type and dirt level can be addressed efficiently. Its eco setting is particularly noteworthy, optimizing water and energy usage for environmentally conscious consumers.

Both models benefit from the latest washing technologies, including inverter motors that promote quiet and efficient operation. This technology not only reduces noise levels during washing cycles but also contributes to improved energy efficiency. Furthermore, both washing machines come with an A+++ energy rating, which assures users of low running costs and minimal environmental impact, making them both economical and eco-friendly choices.

Another key feature common to both models is their user-friendly interface. The LED display and intuitive controls make selecting wash programs and adjusting settings a straightforward task. Additionally, the delay start function allows users to schedule wash cycles at their convenience.

With excellent build quality and a selection of smart features, the John Lewis JLWM1403 and JLWM1202 washing machines stand out as reliable appliances that cater to different household needs, ensuring laundry day is as efficient and hassle-free as possible.
Top Page Image Contents