INSTALLATION INSTRUCTIONS
!WARNING : Two or more people may be need to install and move the appliance.
Install or store unit where it will not be exposed to temperatures below freezing or exposed to outside weather conditions.
Properly ground washer to conform with all governing codes and ordinances. To reduce the risk of electric shock, do not install the washer in humid spaces.
The base opening must not be obstructed by carpeting when the washing machine is installed on a carpeted floor.
In countries where there are areas which may be subject to infestation by cockroaches or other vermin, pay particular attention to keeping the appliance and its surroundings in clean condition at all times.
Damage caused by cockroaches or other vermin will not be covered by the appliance warranty.
Shipping bolts
The appliance is fitted with shipping bolts to prevent internal damage during transportation.
Packing and all shipping bolts must be removed before using the washer.
When unpacking the base, be sure to remove the additional packing support in the middle of the base packing.
ENGLISH
Removing shipping bolts
1.To prevent internal damage during transport, 4 locking bolts are installed. Before operating the washer, remove the bolts and braces.
•If they are not removed, it may cause severe vibration, noise, and malfunction.
2.Unscrew the 4 bolts with the wrench supplied. Do first lower side to remove easily. One of the bolts retains the power cord of the washer to prevent operating without removing bolts.
cap |
3.Take out the 4 bolts and braces by twisting the braces slightly. Keep the 4 bolts, braces and the wrench for future use.
•Whenever the appliance is transported, the shipping bolts and braces must be reinstalled.
4.Close the holes with the caps supplied.
5