Stains on load, Load is wrinkled | Whirlpool W10158200A specification

Stains on load

■Did you add detergent to the dispenser?

For best results, add detergent to the detergent compartment. Do not add detergent to the washer drum.

■Did you use enough HE detergent?

Use enough detergent to remove soil and hold it in suspension. Use only HE detergent. Follow the manufacturer's instructions to determine the amount of detergent to use.

■Is there above average iron (rust) in water? You may need to install an iron filter.

■Did you properly sort the load?

Sort dark clothes from whites and lights.

■Did you unload the washer promptly?

To avoid the transfer of dye, unload the washer as soon as it stops.

■Did you use a fabric softener dispensing ball? Dispensing balls will not operate correctly with this washer. Add liquid fabric softener to the fabric softener compartment.

■Did you use powdered detergent in a low-speed cycle? Consider using liquid detergent.

Load is wrinkled

■Did you unload the washer promptly? Unload the washer as soon as it stops.

■Did you use the right cycle for the load being washed? Use the Delicate, Hand Washables or another cycle with a low-spin speed to reduce wrinkling.

■Did you overload the washer?

The wash load must be balanced and not overloaded. Loads should tumble freely during washing.

Gray whites, dingy colors

■Did you properly sort the load?

The transfer of dye can occur when mixing whites and colors in a load. Sort dark clothes from whites and lights.

■Was the wash temperature too low?

Use hot or warm washes if safe for the load. Make sure your hot water system is adequate to provide a hot water wash.

■Did you use enough detergent, or do you have hard water?

Use more detergent for washing heavy soils in cold or hard water.

Cycle too long

■Did you choose the Sanitary cycle?

The heater will be activated to provide maximum cleaning performance. Additional time will be added to the regular cycle to heat the water. This additional time will depend on the load size and the hot water inlet temperature.

■Is “SUD” shown in the display?

Excessive sudsing has been detected and a suds routine has been started to destroy excessive suds. This routine will add time to the original cycle.

■Did you wash a large load using a gentle cycle?

When using the Delicate and Hand Washables cycles you should use small loads. This ensures a gentle wash for your garments without increasing cycle times.

■Did the load cause imbalance?

When too much imbalance occurs, an imbalance routine will start to redistribute the load. During the imbalance routine, the time displayed may pause until this activity is complete, then resume with the remainder of the cycle.

Door locked at end of wash cycle

■Did all of the water drain out of the washer during the spin?

Select DRAIN/SPIN to remove any water remaining in the washer. The washer door will unlock at the end of the drain.

W10158200A specifications

The Whirlpool W10158200A is an innovative appliance designed to enhance modern kitchens with its advanced features and user-friendly characteristics. This product, primarily known as a refrigerator water filter, is engineered to provide cleaner and better-tasting water and ice, making it an essential component for households that prioritize health and convenience.

One of the main features of the W10158200A is its ability to reduce contaminants. This filter effectively eliminates chlorine taste and odor, lead, mercury, and several other impurities, ensuring that the water you use for drinking, cooking, and making ice is as pure as possible. The advanced filtration technology employed in this product not only enhances the quality of water but also improves the flavor, allowing you to enjoy every sip or glass of ice.

Another notable characteristic of the Whirlpool W10158200A is its easy installation process. The filter is designed to fit securely and seamlessly into compatible Whirlpool refrigerators, making it accessible for even those who may not have extensive DIY experience. Additionally, the straightforward replacement process means that maintaining clean water is a hassle-free task. Users can quickly change the filter without special tools, which encourages regular upkeep and ensures optimal performance.

This water filter boasts a considerable lifespan, typically lasting up to six months or filtering about 200 gallons of water, depending on usage. This longevity allows families to enjoy consistent quality without frequent replacements, making it both cost-effective and practical for everyday use.

Moreover, the W10158200A is designed with sustainability in mind. By providing an efficient filtration solution, this product helps reduce the reliance on bottled water, thus contributing to environmental conservation efforts. Using this filter can lead to less plastic waste while still ensuring that your home has access to safe and refreshing water.

In conclusion, the Whirlpool W10158200A stands out due to its advanced filtration capabilities, user-friendly design, sustainable benefits, and longevity. It is a reliable choice for those looking to improve the quality of their drinking water and enhance their culinary experiences. Embracing this innovative solution helps ensure that families enjoy not only the taste but also the peace of mind that comes with quality water.