Whirlpool W10150593A installation instructions Straight power cord Looped power cord

Page 5

Straight power cord

Straight power cord

1.Remove power plug and yellow strap from machine base to release the rear leveling system.

2.Firmly grasp the power cord and pull to completely remove the power cord, cord restraint, and pin from the rear panel.

3.Confirm that the power cord restraint (A), and pin (B) are removed.

Looped power cord

1.Firmly grasp the yellow shipping strap and pull until both ends are completely removed from washer.

2.Check that two (2) shipping pins were removed with the shipping strap.

A. Power cord restraint

B. Pin

4.To remove the power cord from the cord restraint, push the power cord in, press TAB, and then pull the power cord out.

Image 5

Contents Washer Safety Washer Installation InstructionsTools andParts Installation RequirementsParts supplied Alternate PartsYou will need LocationRequirementsDrainSystem ElectricalRequirements Installation InstructionsBeforeYouStart RemoveShippingMaterialsStraight power cord Looped power cord ConnectDrainHose Connecting the drain hose form to the corrugated drain hoseConnecttheInletHoses To keep drain water from going back into the washerSecuretheDrainHose Install the Front Leveling FeetLevel theWasher Check for leaksSteps in Final Location CompleteInstallationSécurité DE LA Laveuse Exigences D’INSTALLATIONOutillageetpièces Pièces fourniesSystèmedevidange Exigences d’emplacementAutres pièces Il vous faudraSiphon de plancher illustration D SpécificationsélectriquesÉvier de buanderie illustration C Avantdecommencer Instructions D’INSTALLATIONRetraitdumatérieldexpédition Cordon dalimentation droitPour empêcher l’eau de vidange de refluer dans la laveuse RaccordementdutuyaudevidangeRaccordementdes tuyauxd’arrivéed’eau Purger les canalisations d’eau ImmobilisationdutuyaudevidangeInspection-recherche des fuites Raccorder les tuyaux d’arrivée d’eau à la laveuseRéglagedel’aplombdelalaveuse Étapes dans lemplacement finalInstallation des pieds de nivellement avant W10150593A SP PN W10150594A Acheverl’installation