Samsung WF-J1054 Positioning the drain hose, Over the edge of a sink, Ln a sink drain pipe branch

Installing the Washing Machine

2.Connect the other end of the cold water supply hose to your sink’s cold water faucet and tighten it by hand. If necessary, you can reposition the water supply hose at the washing machine end by loosening the fitting, rotating the hose, and retightening the fitting.

Option:	1.	Take the red L-shaped arm fitting for the hot water supply hose and connect to
	2.	the red hot water supply intake on the back of the machine. Tighten by hand.
		Connect the other end of the hot water supply hose to your sink’s hot water
	3.	faucet and tighten it by hand.
		Use a Y-piece if you only want to use cold water.
Notice:	The appliance is to be connected to the water mains using new hose-sets and that old
	hose-sets should not be used.

Positioning the drain hose

The end of the drain hose may be positioned in three ways:

Over the edge of a sink

The drain hose must be placed at a height of between 60 and 90 cm. To keep the drain hose spout bent, use the supplied plastic hose guide. Secure the guide to the wall with a hook or to the faucet with a piece of string to prevent the drain hose from moving.

ln a sink drain pipe branch

The drain pipe branch must be above the sink siphon so that the end of the hose is at least 60 cm above the ground.

ln a drain pipe

Samsung recommends that you use a 65 cm high vertical pipe; it must be no shorter than 60 cm and no longer than 90 cm.

B-3 SAMSUNG Washing Machine Owner’s Instructions