washing a load of laundry
Child lock
A function that prevents children from playing with your washer.
ACTIVATING/DEACTIVATING
If you want to activate/deactivate the Child Lock function, press the Soil Level and Signal buttons at the same time for 3 seconds.
How It Works:
1.“Child Lock” can be activated while your Washer is running.
2.Once you activate “Child Lock”, all controls (except for the Power button) will be locked until you deactivate “Child Lock”.
3.The Child Lock button will be lit while it is in effect.
When buttons, other than the Power button, do not respond, please check if the “Child Lock” function is on.
Garment+
You can add or take out laundry items even after the wash has started, as long as the “Garment+” light is on. Pushing the Start/Pause button unlocks the door, unless the water is too hot or if there is too much water in your Washer. If you are able to unlock the door and wish to continue the wash cycle, close the door and press the Start/Pause button.
My cycle
Allows you to activate your custom wash (temperature, spin, soil level, etc.) with
By pushing the My Cycle button, you activate the settings used during the My Cycle mode. The “My Cycle” light will indicate activation.
You can select all options as follows in “My Cycle” mode.
1.Select cycle using the Cycle Selector dial.
2.After cycle selection, set each option.
See page 25 for available option settings with each cycle.
3.Then, you can start “My Cycle” by pushing the Start/Pause button in “My Cycle” mode. The cycle and options you select will be displayed the next time you choose “My Cycle”.
You can change the “My Cycle” settings by repeating the same process above. The last used setting will be displayed the next time you choose “My Cycle”.