FOR SILVERCARE™ WASHING
An increased consumer demand for
Pure silver atoms have an electron stripped away by electrolysis during the wash and rinse cycles, which releases up to 16 million trillion silver ions that then penetrate deep into the fabric to sanitize clothing (according to U.S. EPA Test Guideline
Here’s how it works: A
-Silver ions (Ag+)
Extra delicate blouses, shirts, or even lingerie that can’t be washed in hot water can now be sanitized effectively without the adverse effects of hot water. The silver plates carry a warranty of ten years, and can easily be replaced by a Service Technician if needed.
To use :
1.Load the washer.
2.Press the Power button.
3.Select a Cycle by turning the Cycle Selection dial.
4.Press the SilverCare™ button.
5.Add detergent in the dispenser tray for main washing, and add fabric softener up to the marked line.
6.Press the Start/Pause button.
: The washer automatically selects optimal washing conditions by sensing the laundry’s weight.
FOR HOME USE ONLY– COMMERCIAL USERS SHOULD NOTIFY THEIR LOCAL WASTE TREATMENT AUTHORITIES BEFORE USE
The total number of silver cycles run by the washer is displayed when pushing the Signal button and the SilverCare™ button.
LU3 : less than 1000 times
LU2 : between 1000 to 2000 times
LU1 : between 2000 to 2999 times
LU0 : over 2999 times
You should replace the SilverCare™ kit when the display reads “LU0” as the electrodes are near the end of their useful life. Contact
You cannot choose the SilverCare™ option with the Wool cycle.
03 Washing a load of laundry