Samsung DV338 service manual Continuous Run Mode, Special Test Mode

ALIGNMENT AND ADJUSTMENTS

WARNING

To avoid risk of electrical shock, personal injury or death; disconnect power to dryer before servicing, unless testing requires power.

TEST MODE

Continuous Run Mode

Continuous Run Mode:

1.Press Signal + Dry Level for 3 sec during Power On State (Normal User Mode) .

2.Once in Continuous Run Mode, 7-Segment will toggle display “total cycle” and the remain- ing time.

3.The previous cycle will restart during Continuous Run Mode until continuous run mode is disabled.

4.During Continuous Run Mode, press Signal + Dryness Level for 3 seconds to return

to normal user mode. 7-segment will no long display “total cycle ” and only display the remaining time.

Special Test Mode

Definition of Special Test Mode:

-Dryer must be on before Service Mode can be entered.

-Press Signal and Temp Keys for 3 seconds, or until 3 beeps are heard.

-The machine will now be in Service Mode.

-Upon entry into Service Mode, the Sensor Bar Touch Data will be shown (Default Special Test Mode).

How to Enter:

-To enter Special Test Mode press Signal and Temp Keys for 3 seconds for 3 seconds or until the control beep.

Technical_information-02365B.ind3 3

2008-06-25 ¿ÀÈÄ 5:24:23