Description of the appliance
Cancelling/Altering a programme
To cancel or alter a programme which is running, turn the programme selector dial to the RESET position: three flashing dashes will be dis- played, the programme is cancelled. The machine will maintain the water in the tub. To drain water, select DRAIN programme. If you wish to select another programme maintaining the water in the tub, after cancelling the previously selected programme select a new one and then start it by pressing START/PAUSE button.
Opening the door after the programme has started
You can open the door, after having set the machine to PAUSE, provid- ed the following conditions exist:
•the machine is not in the heating or drying phase beyond 55°C;
•the level of the water is not high;
•the drum is not turning.
If these requirements are met, when you pause the machine the door can be opened.
Should it not be possible to open the door, and should it be absolutely necessary to do so, switch the machine off by pressing the ON/OFF but- ton.
After approximately 3 minutes, you can open the door.
Pay attention to the level and temperature of the water in the machine!
When you close the door and press the ON/OFF button again, the wash- ing machine will resume the programme from the point where it had been interrupted.
17