Electrolux 14700 VIT manual E10

Page 41

Something not working?

Problem

Possible cause

Solution

Spinning starts late or the machine does not spin

The machine will not dry or the laundry is not dry enough

The unbalance detection

If the laundry is not evenly

device that prevents

distributed inside the drum

excessive vibration during

at the beginning of the

spinning has cut in.

spin cycle, the machine

 

detects this and tries to

 

redistribute it more evenly

 

by means of a few drum

 

rotations.

 

Only when the laundry is

 

more evenly distributed

 

will the spin cycle be

 

performed, at a lower speed,

 

if the laundry is not evenly

 

distributed.

 

If, after about 6 minutes,

 

the laundry is still tangled,

 

the machine will not spin.

 

Therefore, if the laundry is

 

still wet at the end of the

 

cycle, it is advisable to

 

redistribute it manually

 

inside the drum and to

 

select the spin programme

 

again.

 

 

The water tap is not open

Open the water tap.

(E10).

 

The drain filter is clogged.

Clean the filter.

(EF0).

 

The drying time has not

Select the drying time.

been selected.

 

An appropriate drying time

Select the appropriate

has not been chosen.

drying time suitable for the

 

required degree of drying,

 

according to the type of

 

fabric (cottons or easy-cares).

There is too much laundry

Reduce the load.

inside the appliance.

 

 

 

41

Image 41
Contents Lavamat 14700 VIT Turbo Dear customer Contents Programme charts Building-in Installation Safety instructionsGeneral safety During use Child safetyMachine DisposalPackaging materials Tips for environmental protection Main features of your washer-dryer Front view Description of the applianceProgramme selector dial Control panelON/OFF button Delay Start buttonMains-on light START/PAUSE buttonProgramme Option buttons Drying Time buttonSpin Speed Programme progress display DisplayOpening the door after the programme has started Cancelling/Altering a programmeBefore the first wash Detergent dispenser drawerSorting out and preparing the laundry Preparing the wash cycleTypes of fabric and care labels Weight of laundryCotton Synthetics Easy-caresDelicates Which detergent? Detergents and additivesTraditional Powders Which form?Garments not suitable for drying Preparing the drying cycleLoad Fibre residue Drying symbols on garment labelsDuration of the drying cycle Additional drying Switching the machine on How to washMax. load Load the laundrySelection of the Extra Rinse option Selection of the desired wash programmeSelection of the Spin Speed or Rinse Hold option Starting the programme Selection of the Delay Start optionIf the delay start option has been selected, the machine Drying only How to dryAt the end of the programme NON-STOP programme Automatic washing and dryingWash programmes Programme chartTo empty press Special programmesDrying Periodical cleaning Cleaning and maintenanceAfter each wash ExteriorWater inlet filter Door sealDrain filter Emergency emptying out Frost precautionsSomething not working? TroubleshootingProblem Noisy Feet have not been E10 If grey stains remain on the laundry Unsatisfactory washing resultsFoam is still visible even after the last rinse White residue is left on the laundryThis appliance complies with the following EC directives Technical dataService & Spare Parts Service & Spare Parts08705 929 Help us to help youCustomer care Exclusions Standard Guarantee ConditionsEuropean Guarantee Safety instructions for the installer Instructions for installation and electrical connectionRear view Front view and side viewUnpacking InstallationLevelling PositioningDo not connect to a hot water supply Water inlet cold water connection onlyWater drainage Electrical connections Interest of the environmentPermanent connection Building-in Preparation and assembly of the doorDoor HingesCounter-magnet Mounting the doorDrill four fixing holes see Fig. G Building-in Electrolux plc