Electrolux 14700 VIT manual Something not working?, Troubleshooting

Page 38

Something not working?

If, during the spin cycle, the machine makes an unusual whistling noise, different from the noise made by tradi- tional washing machines, this is due to a new type of motor.

If water is not visible in the drum, this is due to the modern technology of new washing machines that use less water than traditional machines.

Troubleshooting

If a problem arises, you can try to solve it yourself following the instructions below.

If you call out an engineer when one of the following problems arises, or to repair a fault due to incorrect use, the call-out will be charged even if requested within the guarantee period.

During machine operation the following alarm codes may be displayed:

-E10: problem with the water supply

-E20: problem with water draining

-E40: door open

-EF0: drain filter clogged

Once the problem has been eliminated, press the START/PAUSE button to restart the programme. If after all checks, the problem persists, con- tact your local AEG Service Force Centre.

Problem		Possible cause	Solution


		The ON/OFF button	Depress the button.
		has not been depressed.
		The main electrical fuse or	Replace the fuse.
		the fuse in the plug has
		blown.
The machine does not work		The door is not properly	Close the door; the click
The machine does not work		closed (E40).	of the lock should be heard.
		The plug is not connected.	Insert the plug.
		The START button has not	Press the button.
		been pressed.
		The DELAY START	Check the selected delay on
		option has been selected.	the display.

38

Image 38

Contents Lavamat 14700 VIT Turbo Dear customer Contents Programme charts Building-in Installation Safety instructionsGeneral safety Child safety During useMachine DisposalPackaging materials Tips for environmental protection Main features of your washer-dryer Description of the appliance Front viewControl panel Programme selector dialMains-on light Delay Start buttonON/OFF button START/PAUSE buttonDrying Time button Programme Option buttonsSpin Speed Display Programme progress displayCancelling/Altering a programme Opening the door after the programme has startedDetergent dispenser drawer Before the first washPreparing the wash cycle Sorting out and preparing the laundryCotton Weight of laundryTypes of fabric and care labels Synthetics Easy-caresDelicates Detergents and additives Which detergent?Which form? Traditional PowdersGarments not suitable for drying Preparing the drying cycleLoad Fibre residue Drying symbols on garment labelsDuration of the drying cycle Additional drying Max. load How to washSwitching the machine on Load the laundrySelection of the Extra Rinse option Selection of the desired wash programmeSelection of the Spin Speed or Rinse Hold option Starting the programme Selection of the Delay Start optionIf the delay start option has been selected, the machine Drying only How to dryAt the end of the programme Automatic washing and drying NON-STOP programmeProgramme chart Wash programmesSpecial programmes To empty pressDrying After each wash Cleaning and maintenancePeriodical cleaning ExteriorWater inlet filter Door sealDrain filter Frost precautions Emergency emptying outTroubleshooting Something not working?Problem Noisy Feet have not been E10 Foam is still visible even after the last rinse Unsatisfactory washing resultsIf grey stains remain on the laundry White residue is left on the laundryTechnical data This appliance complies with the following EC directives08705 929 Service & Spare PartsService & Spare Parts Help us to help youCustomer care Standard Guarantee Conditions ExclusionsEuropean Guarantee Instructions for installation and electrical connection Safety instructions for the installerFront view and side view Rear viewInstallation UnpackingPositioning LevellingDo not connect to a hot water supply Water inlet cold water connection onlyWater drainage Interest of the environment Electrical connectionsPermanent connection Door Preparation and assembly of the doorBuilding-in HingesMounting the door Counter-magnetDrill four fixing holes see Fig. G Building-in Electrolux plc