Electrolux 14700 VIT manual Interest of the environment, Electrical connections

Page 53

ÿInstallatio

Longer drain hoses are available in lengths of 2.7 and 4 metres from your AEG Service Force Centre.

If you intend the drain hose from the machine to empty into a sink, make sure that the sink is empty and the plug hole is not blocked. Use the plastic “U -Piece” supplied.

Important

Before connecting up the machine to new pipework or to pipework that has not been used for some time, run off a reasonable amount of

water to flush out any debris that may have collected in the pipes.

In the interest of the environment

Washing machines and dish- washers should be connected to the FOUL drainage system, the water will then be taken to a sewage works for treat- ment before being discharged safely into a river.

It is essential that these appli- ances are not connected to the surface water drainage system as this water is discharged directly into a river or stream and may cause pollution.

If you require any further advice please contact your local water authority.

SHOWER

SINK TOILET

BATHBIDET

WASHING

MACHINE DISHWASHER

RAINWATER

'RUN-OFF'

		FOUL DRAIN
	SURFACE WATER	FOUL SEWERS
	SURFACE WATER
	DRAINS & SEWERS	SEWAGE
		SEWAGE
	UNTREATED	TREATMENT
	UNTREATED	WORKS
	DISCHARGE	WORKS
	DISCHARGE	TREATED
		TREATED
		DISCHARGE
	RIVER	RIVER

Electrical connections

WARNING: THIS APPLIANCE MUST BE EARTHED.

The manufacturer declines any liability should this safety measure not be observed.

If the plug that is fitted to your appliance is not suitable for your socket outlet, it must be cut off and the appropriate plug fitted.

Remove the fuse from the cut off plug.

53

Image 53

Contents Lavamat 14700 VIT Turbo Dear customer Contents Programme charts Building-in Installation Safety instructionsGeneral safety During use Child safetyMachine DisposalPackaging materials Tips for environmental protection Main features of your washer-dryer Front view Description of the applianceProgramme selector dial Control panelON/OFF button Delay Start buttonMains-on light START/PAUSE buttonProgramme Option buttons Drying Time buttonSpin Speed Programme progress display DisplayOpening the door after the programme has started Cancelling/Altering a programmeBefore the first wash Detergent dispenser drawerSorting out and preparing the laundry Preparing the wash cycleTypes of fabric and care labels Weight of laundryCotton Synthetics Easy-caresDelicates Which detergent? Detergents and additivesTraditional Powders Which form?Garments not suitable for drying Preparing the drying cycleLoad Fibre residue Drying symbols on garment labelsDuration of the drying cycle Additional drying Switching the machine on How to washMax. load Load the laundrySelection of the Extra Rinse option Selection of the desired wash programmeSelection of the Spin Speed or Rinse Hold option Starting the programme Selection of the Delay Start optionIf the delay start option has been selected, the machine Drying only How to dryAt the end of the programme NON-STOP programme Automatic washing and dryingWash programmes Programme chartTo empty press Special programmesDrying Periodical cleaning Cleaning and maintenanceAfter each wash ExteriorWater inlet filter Door sealDrain filter Emergency emptying out Frost precautionsSomething not working? TroubleshootingProblem Noisy Feet have not been E10 If grey stains remain on the laundry Unsatisfactory washing resultsFoam is still visible even after the last rinse White residue is left on the laundryThis appliance complies with the following EC directives Technical dataService & Spare Parts Service & Spare Parts08705 929 Help us to help youCustomer care Exclusions Standard Guarantee ConditionsEuropean Guarantee Safety instructions for the installer Instructions for installation and electrical connectionRear view Front view and side viewUnpacking InstallationLevelling PositioningDo not connect to a hot water supply Water inlet cold water connection onlyWater drainage Electrical connections Interest of the environmentPermanent connection Building-in Preparation and assembly of the doorDoor HingesCounter-magnet Mounting the doorDrill four fixing holes see Fig. G Building-in Electrolux plc