Electrolux 14700 VIT manual Safety instructions, General safety, Installation

Page 6

Safety instructions

Your safety is of paramount importance, please ensure you read this instruction book before installing or using this appliance.

General safety

•Repairs to the machine must be carried out only by qualified person- nel. Repairs carried out by inexperienced persons could cause injury or serious malfunctioning. Contact your local AEG Service Force Centre.

•Never start the machine if the mains cable is damaged or the control panel or worktop are damaged allowing inner components to be accessible.

•Unplug the appliance before carrying out any cleaning or mainte- nance operations.

•Never pull the mains cable to remove the plug from the socket; always take hold of the plug itself.

•During high temperature wash programmes and during the drying cycle, the door glass may get hot.

•Let the water cool down before carrying out emergency emptying or before opening the door in an emergency.

Installation

•Follow the installation instructions carefully.

•Carry out a first wash without laundry (COTTONS 60, with half the amount of detergent) in order to remove any manufacturing residue from the tub and the drum.

6

Image 6

Contents Lavamat 14700 VIT Turbo Dear customer Contents Programme charts Building-in Safety instructions General safetyInstallation Child safety During useDisposal Packaging materialsMachine Tips for environmental protection Main features of your washer-dryer Description of the appliance Front viewControl panel Programme selector dialMains-on light Delay Start buttonON/OFF button START/PAUSE buttonDrying Time button Programme Option buttonsSpin Speed Display Programme progress displayCancelling/Altering a programme Opening the door after the programme has startedDetergent dispenser drawer Before the first washPreparing the wash cycle Sorting out and preparing the laundryCotton Weight of laundryTypes of fabric and care labels Synthetics Easy-caresDelicates Detergents and additives Which detergent?Which form? Traditional PowdersPreparing the drying cycle LoadGarments not suitable for drying Drying symbols on garment labels Duration of the drying cycleFibre residue Additional drying Max. load How to washSwitching the machine on Load the laundrySelection of the desired wash programme Selection of the Spin Speed or Rinse Hold optionSelection of the Extra Rinse option Selection of the Delay Start option If the delay start option has been selected, the machineStarting the programme How to dry At the end of the programmeDrying only Automatic washing and drying NON-STOP programmeProgramme chart Wash programmesSpecial programmes To empty pressDrying After each wash Cleaning and maintenancePeriodical cleaning ExteriorDoor seal Drain filterWater inlet filter Frost precautions Emergency emptying outTroubleshooting Something not working?Problem Noisy Feet have not been E10 Foam is still visible even after the last rinse Unsatisfactory washing resultsIf grey stains remain on the laundry White residue is left on the laundryTechnical data This appliance complies with the following EC directives08705 929 Service & Spare PartsService & Spare Parts Help us to help youCustomer care Standard Guarantee Conditions ExclusionsEuropean Guarantee Instructions for installation and electrical connection Safety instructions for the installerFront view and side view Rear viewInstallation UnpackingPositioning LevellingWater inlet cold water connection only Water drainageDo not connect to a hot water supply Interest of the environment Electrical connectionsPermanent connection Door Preparation and assembly of the doorBuilding-in HingesMounting the door Counter-magnetDrill four fixing holes see Fig. G Building-in Electrolux plc