10electrolux
SELECT THE TEMPERATURE BY PRESSING BUTTON 2
By selecting a programme, the appliance proposes automatically a default tempera- ture.
Press this button repeatedly to increase or decrease the temperature, if you want your laundry to be washed at a different temper- ature.
REDUCE THE SPIN SPEED BY PRESSING BUTTON 3
By selecting a programme, the appliance proposes automatically the maximum spin speed provided for that programme. Press button 3 repeatedly to change the spin speed, if you want your laundry to be spun at a different speed. The relevant light illuminates.
SELECT THE AVAILABLE OPTION BY PRESSING BUTTONS 3, 4 AND 5
Depending on the selected programme, dif- ferent functions can be combined before pressing the button 8. By selecting an op- tion the relevant pilot light illuminates.
If an incorrect option is selected, the inte- grated red pilot light of the button 8 flashes 3 times and the Err message appears on the display for few seconds.
For compatibility among the washing programmes and the options see chapter «Washing Programmes».
SELECT AN ADDITIONAL RINSE
This appliance is designed for saving water. However, for people with a very delicate skin (allergic to detergents) it may be nec- essary to rinse the laundry using an extra quantity of water (Extra Rinse). To activate this option press simultaneously the but- tons 4 and 6 for some seconds. The pilot light 9 illuminates. This function stays per- manently on. To remove it press the but- tons 4 and 6 again until the pilot light 9 goes off.
SELECT THE DELAY START BY PRESSING BUTTON 6
Before you start the programme, if you wish to delay the start, press the button 6 re- peatedly, to select the desired delay. The relevant pilot light goes on.
The selected delay time value (up to 20 hours) will appear on the display a few sec- onds, then the duration of the programme will appear again.
You must select this option after you have set the programme and before you press button 8.
You can cancel or modify the delay time at any moment, before you press button 8. Selecting the delayed start:
1.Select the programme and the required options.
2.Select the delay start by pressing the button 6.
3.Press button 8:
–the machine starts its hourly count- down.
–The programme will start after the selected delay has expired.
Cancelling the delayed start after having pressed button 8:
1.Set the washing machine to PAUSE by pressing button 8.
2.Press button 6 once until the symbol 0’ is displayed
3.Press button 8 again to start the pro- gramme.
Important! The selected delay can be changed only after selecting the washing programme again.
The Delay Start can not be selected with DRAIN programme.
START THE PROGRAMME BY PRESSING BUTTON 8
To start the selected programme, press the button 8, the green pilot light of the button 8 stops blinking.
To interrupt a programme which is running, press the button 8: the green pilot light starts blinking.
To restart the programme from the point at which it was interrupted, press the button 8 again. If you have chosen a delayed start, the machine will begin the countdown. If an incorrect option is selected, the red pilot light of the button 8 blinks for 3 times the message Err is displayed for a few sec- onds.