2.Remove the power supply cable and the draining and inlet hose from the hose holders on the rear of the appli- ance.
3.Unscrew the three bolts with the sup- plied spanner.
2
1
4. Slide out the relevant plastic spacers.
5.Open the porthole and remove the pol- ystyrene block fitted on the door seal.
electrolux 27
6.Fill the smaller upper hole and the two large ones with the corresponding plas- tic plug caps supplied in the bag con- taining the instruction booklet.
POSITIONING
Install the machine on a flat hard floor. Make sure that air circulation around the machine is not impeded by carpets, rugs etc. Check that the machine does not touch the wall or other kitchen units. Level the washing machine by raising or lowering the feet. The feet may be tight to adjust as they incorporate a self locking nut, but the machine MUST be level and stable. If nec- essary, check the setting with a spirit level. Any necessary adjustment can be made with a spanner. Accurate levelling prevents vibration, noise and displacement of the machine during operation.
Caution! Never place cardboard, wood or similar materials under the machine to compensate for any unevenness in the floor.