electrolux 7
DISPLAY
7.3 |
| 7.4 |
| 7.1 |
7.2
The display shows the following informa- tion:
7.1:
•Duration of the selected programme After selecting a programme, the duration is displayed in hours and minutes (for ex- ample 2.05 ). The duration is calculated automatically on the basis of the maxi- mum recommended load for each type of fabric. After the programme has started, the time remaining is updated every mi- nute.
•Selected drying time
After selecting a drying programme, the drying time is displayed in minutes or in hours and minutes (e.g. 130 mins =
2.10 ). After the programme has started the time remaining is updated every mi- nute.
•Delayed start
The Selected delay set by pressing the relevant button appears on the display for few seconds, then the duration of the se- lected programme is displayed again.
•Alarm codes
In the event of operating problems, some alarm codes can be displayed, for exam- ple E20 (see paragraph «What to do if...»).
•Incorrect option selection
If an option which is not compatible with the set wash programme is selected, the message Err is displayed at the bottom
of the display for a few seconds and the integrated red light of button 8 start flash- ing.
•End of programme
When the programme has finished three flashing zeros are displayed, the pilot light 9 and the pilot light of button 8 go out
and the door can be opened.
7.2: Washing programme phase icons
•Wash
•Rinses
•Drain
•Spin
•Dry
By selecting the wash programme, the washing programme phase icons corre- sponding to the various phases making up the programme are shown in the bottom part of the display. After having pressed button 8 only the icon of the running phase stays on.
7.3: Soil degree icons
•Intensive
•Normal
•Daily
•Light
•Quick
•Super Quick
•Refresh
•Super Refresh
When selecting a programme on the dis- play appears an icon indicating the degree