Builder’s Guide for AMD Opteron™ | 30925 Rev. 3.04 February 2004 |
Servers and Workstations |
|
Figure 6. Backplate Release Liner
3.Gently lift the motherboard by the edges over the backplate.
4.Align the two threaded standoffs on the backplate with the two mounting holes near the socket on the motherboard. (See Figure 7.)
Figure 7. Motherboard Placed Over Backplate
5.Gently lower the motherboard until the standoffs fit through the holes near the socket and the backplate makes complete contact with the motherboard.
6.Press firmly on the socket to ensure proper contact between the backplate and motherboard. (See Figure 8 on page 21.)
20 | Heatsink Installation | Chapter 4 |