AMD 30925 manual AMD Opteron Processor-Based System Build Procedure

Page 48

Builder’s Guide for AMD Opteron™ Processor-Based

30925 Rev. 3.04 February 2004

Servers and Workstations

 

8.Install the assembled motherboard and processor with heatsink into the chassis. Always install any standoffs needed to support the motherboard, especially in the areas where cards will be placed.

9.Check the motherboard for any jumper settings. (Most motherboards do not require jumpers.)

10.Ensure the selected memory (256 Mbytes or more are recommended for server/workstations) is shown on the motherboard maker’s recommended memory list. If the motherboard manufacturer does not have a verified/recommended memory listing, check with the memory supplier to verify that they have tested your chosen motherboard and deemed it to be compatible with the DIMM memory modules you plan to use.

11.Install the recommended memory into the motherboard. Be sure to install the RAM in the sequence required for the chosen motherboard. Verify each memory DIMM is inserted all the way into the socket and locked in place.

12.Install a high-performance AGP video graphics card. Have the latest drivers available (see the Web site of the card maker). You will need the drivers shortly.

13.Connect the power cables to the drives and motherboard.

14.Connect the hard drive, floppy-disk drive, and DVD (CD-ROM) data cables in the normal manner. Verify that the cables are installed securely and with the proper edge near Pin 1.

15.Connect the monitor data cable, keyboard cable, and mouse cable to the rear of the system.

16.Install the AC-line power cord on the power supply and connect to the power outlet.

17.Go to the Web sites of the motherboard vendor or the chipset maker for the latest drivers and utilities.

18.Check your motherboard vendor’s Web site for the latest version of the BIOS, AGP miniport driver and bus mastering IDE driver. (AMD has drivers available for its chipsets at www.amd.com. In EMEA, please go to http://www.amd.com/drivers.)

19.Check the peripheral manufacturer’s Web site for the latest drivers for the sound card, network interface card, the video graphics card, and any other added devices.

20.Power the system on and begin loading software and drivers, following the installation instructions.

21.Make sure the system starts and runs reliably with just the graphics card installed. Restart and run the system multiple times.

22.Install additional cards at this time, if additional cards are to be installed.

 

AMD Opteron™

 

48

Processor-Based System Build Procedure

Appendix A

Image 48
Contents Revision Trademarks Contents Servers and Workstations EMI Reduction TechniquesList of Figures AMD Opteron Processor ArchitectureList of Tables Revision History Date Revision DescriptionRevision History AMD Opteron Processor Key Architectural Features AMD64 ArchitectureOther Features of the AMD Opteron Processor Integrated DDR Dram Memory ControllerHyperTransport Technology Validated Server Program VSP Value PropositionDesign Methodology for the VSP Platform Platform Description Model A2210 1U/2P Rack Server Model A8440 4U/4P Rack Server Not Yet a Member of VSP? Servers and Workstations Validated Server Program VSP AMD Opteron Processor-In-a-Box AMD64 Processor-in-a-BoxServers and Workstations AMD Opteron Processor-In-a-Box Heatsink Installation Heatsink Installation ProcedureBackplate Release Liner Ensure Proper Contact Between Backplate and Motherboard Tightening Down the Retention Frame Pushing Gently Down on the Processor Heatsink Centered Over Processor Pushing Straight Down on the Clip Turning the Cam Lever Installed Heatsink Servers and Workstations Heatsink Installation Hardware Considerations System Enclosures and Chassis SelectionBasic System Enclosure Selection Guidelines Basic Chassis Selection GuidelinesPower Supply Considerations Desirable Airflow-Power Supply with Bottom InletPower Supply Guidelines Server and Workstation Platform Power SuppliesCalculating System Power Consumption Power Worksheet 1-Component PowerPower Worksheet 2-Total Watts Total Watts A = W For Each Voltage LevelThermal Solution AMD Opteron Processor Thermal Solution GuidelinesMemory Guidelines for AMD Opteron Processor- Based Systems AMD Opteron Processor InformationAMD Opteron Processor Series and Model Numbers AMD64AMD Chipset Information AMD-8000 Series ChipsetGraphics and Storage AMD-8131 HyperTransport PCI-XTunnelAMD Opteron Processor Utilities and Updates AMD-8000 Series Chipset DriversBit Operating Systems Linux Drivers for the AMD-8000 Series of Chipset Components Drivers for Linux KernelServers and Workstations Hardware Considerations EMI Reduction Techniques EMI Emission StandardsSpread Spectrum Clocking Disable Unused Clocks Power Supply Cable RoutingRear I/O Connector Shield Processor Heatsink Fan Cable RoutingProcessor Heatsink Grounding Servers and Workstations EMI Reduction Techniques Appendix a AMD Opteron Processor-Based System Build Procedure Builder’s Guide for AMD Opteron Processor Builder’s Guide for AMD Opteron Processor-Based Appendix B FAQs AMD Opteron Processor FAQsWhat is the value proposition of the AMD Opteron processor? Validated Server Program FAQs Where are EMI guidelines for motherboards located?Will these validated servers be available in all regions? Builder’s Guide for AMD Opteron Processor