30925 Rev. 3.04 February 2004 | Builder’s Guide for AMD Opteron™ Processor- |
| Based Servers and Workstations |
21.Connect the fan power lead to the proper connector on the motherboard. Figure 20 shows an installed heatsink.
Figure 20. Installed Heatsink
22.Check the installation completely to make sure heatsink is installed correctly before starting the system.
23.
24.Verify immediately that the fan on the processor heatsink is turning at a rapid rate.
If the fan is spinning at a slow rate or not spinning at all,
Chapter 4 | Heatsink Installation | 27 |