Programme with the Button, During the Programme

If you wish to save the change permanently, you can press the Enter button after making the change.

Spinning at 400-800 revolutions/minute al- ways means a short spin.

It is not possible to select a spin speed higher than 800 revolutions/minute for the Hand pro- gramme.

No Spin means that the programme will be executed without spinning and will end with draining.

No Drain means that the programme will be executed without spinning and will end with the final rinsing water remaining in the machi- ne. The wash will then remain floating in the final rinsing water. You can then select a spin

programme or press the button to empty the machine, if required.

7C L O S E T H E D O O R A N D S TA RT T H E

PROGRAMME WITH THE BUTTON

The text on the bottom edge of the display indicates that the programme has star- ted.

NOTE

If the child lock is on, the button must be held down for 3 seconds.

Remaining time

The remaining time is shown in hours and minu- tes (alternating) at the bottom right of the dis- play together with the symbol.

Once a programme has been selected, an es- timated running time for the programme is dis- played. This time may vary to some extent from time to time due to the temperature of the in-

coming water and the size of the load.

The remaining time is recalculated during the programme and may then be increased or reduced to some extent.

DURING THE PROGRAMME

The actual sequence is shown in the display during the programme, e.g. “Main wash” or “Rinse”.

If you wish to interrupt or change the pro- gramme

Hold down the button for three se-

conds. The text on the bottom edge of the display indicates that the programme has been interrupted.

Add more detergent, if necessary, before se- lecting a new programme.

Putting in or taking out washing

If you wish to put in or take out washing after you have started the machine, you must hold

down the button for three seconds, and a key will appear on the bottom edge of the dis- play. Any water will be pumped out, and the door can then be opened. Put in more washing, add more detergent, if necessary, and close the door. The washing programme will restart au- tomatically from the point at which it was in- terrupted.

Change settings after starting

It is possible for you to alter certain settings and options after you have started the washing programme.