Maytag MAF 9801 manual Panel, Lc-Display

Page 8

6 PANEL

1

2

3

4

5

1.INDICATOR LAMP ON/OFF

2.MAIN POWER SWITCH

3.PROGRAMME SELECTOR BUTTONS P1-P4

4.DISPLAY

5.START/STOP BUTTON

6.DOOR OPENING BUTTON

6

7

8

9

10

7.MENU BUTTON

8.BUTTON FOR CHANGING TEMPERATURE/INDEX BACK

9.BUTTON FOR CHANGING SPIN SPEED/ INDEX FORWARD

10.ENTER BUTTON

7 LC-DISPLAY

1

2

3	4	6	7	8
		5

NOTE

The display will be extinguished if no buttons are pressed within three minutes. The display will be reinstated the next time any button is pressed.

1.TEXT FIELD INDICATING PROGRAMME, OPTIONS AND FAULT MESSAGES, ETC.

2.DISPLAYS SELECTED SPIN SPEED

3.INDICATES SELECTED PROGRAMME

4.INDICATES THAT A PROGRAMME HAS STARTED 10 5. INDICATES THAT THE WASHER DOOR IS OPEN

9OR MUST BE OPENED

6.INDICATES THAT A PROGRAMME HAS BEEN COMPLETED OR HAS STOPPED

7.DISPLAYS THE SELECTED WASHING TEMPERA TURE

8.SEE 9 AND 10 BELOW

9.INDICATES THAT DELAYED START IS ON. 8 THEN DISPLAYS HOURS REMAINING TO START

10.INDICATES THAT 8 IS DISPLAYING THE PROGRAMME TIME REMAINING IN HOURS AND MINUTES (ALTERNATING)

8

Image 8

Contents Maytag Contents Before Washing the First Time Transport SupportsWasher Door Check Hardness of the WaterSafety Instructions GeneralOverfill Protection Interrupting a ProgrammeTRANSPORT/ Winter Storage DisposalProtect Children Childrens SafetyCHILD-SAFE Washing Parts of the Washing Machine Detergent CompartmentPanel LC-DISPLAYBefore Washing High Water Level Avoid Creases WashingMinimizing Allergy Hazards Save TimeWashing Time DetergentsTextile Dyeing Washing Washing with Easy Control4PUTTING in the Washing and DETER- Gent 1SORT the Washing3O P E N T H E D O O R a N D P U T I N T H E Washing Button 6TEMPORARY Alteration of TEMPERA- Ture and Spin SpeedProgramme with the Button During the Programme9WHEN Washing is Finished 8PROGRAMME CompletedDelayed Start 1-24 Hours Temporary Spinning or RinsingConsumption Values PRE-SET Programmes Making OWN Washing Programmes Available Settings and Options Interrupt Input Create Your OWN Washing ProgrammeTIP Reset Programme Pre Available Types of ProgrammeMenu System for Changing a Preset Programme Select High water levelThis page has been left blank for technical printing reasons Cleaning the Outside of the Machine Care and CleaningCleaning the Detergent Compartment Cleaning Holes Under the Ridges Hard WaterTrouble Shooting Fault IndicationsDoor will not Open Machine will not StartWash motor fault. Phone Service Wrong Language on the DisplayTernative Celsius or FahrenheitStandard Tests Technical DataTechnical Information This page has been left blank for technical printing reasons Guarantee Service and GuaranteeService Quick Guide WashingIndex Chapter