Available Settings and Options

Setting/Option	Description	Restrictions

Programme types	Available programmes are described in a separate ta-
	ble in this Chapter.
	Change of programme type resets all options and set-
	tings to their original values.

Temperature, 30-95°C	Here you select the temperature to be displayed when you	For some types of programme, only tempe-
	have selected the pre-set programme (P1-P4).	ratures between 30 and 40°C can be
	It is always possible to adjust the temperature by pressing	selected. See table.
	buttons before the start.
	C indicates the temperature of the incoming water.
	Temperatures above 60°C are not stored permanently.

Spin speed	Here you select the speed to be displayed when you have	For some types of programme, only speeds
400-1800 rev/min	selected the pre-set programme (P1-P4).	between 400 and 800 revolutions/minute
No spin	If No spin or No Drain is selected, no spin will be perfor-	can be selected. See Table.
No drain	med. No drain allows the water to remain in the machine	No Spin and No Drain cannot be selected
	after washing.	for programme types Spin and Drain.
	It is always possible to adjust the setting by pressing but-
	tons before the start.

Delayed start	If you select a delayed start of five hours, for example, the	Cannot be selected for programme
(0-24 hours)	machine will start five hours after you pressed the start	type Drain.
	button. The time remaining until the start is shown in the
	display.
	Changes to this option are not stored permanently.

Super rinse	With Super rinse On, extra rinses will be included in the	Cannot be selected for programme types
	rinse programme. See Table.	Rinse, Spin and Drain.

E2 Eco/Efficiency	With E2 Eco/Efficiency On, the main wash is extended by	Can only be selected for the Heavy, Nor-
	about 22 minutes.	mal and White/Coloured programmes.
	For more information about how to use E2,
	see Chapter 8, Before washing.

Pre-soak	Pre-soak On means that the washing will be left to soak for	Cannot be selected for programme types
	two hours before the washing programme starts.	Rinse, Spin and Drain.

Anti-crease	Anti-crease On means that the machine will rotate the	Cannot be used together with No spin
	drum for a few seconds every minute for two hours after	and No Drain.
	the programme is completed. You can end the program-	Cannot be selected for programme ty-
	me during this period with the door opening button.	pes Rinse, Spin and Drain

High water level	High water level On means that an extra quantity of water	Can be used for all programmes apart from
	is used in the main wash and rinses.	Wool and Hand. These always use a high
		water level.