Maytag MAF 9801 manual Create Your OWN Washing Programme, Tip, Interrupt Input

Page 21

CREATE YOUR OWN WASHING PROGRAMME

1.Press one of the buttons P1 - P4 under which you wish to store your programme. You can select any button you like if you only want to make a temporary programme.

2.Index forward with the Menu button to the setting or option that you wish to change. If the child lock is activated, nothing will happen. Hold down the button for 3 seconds, and then press as usual.

All the programme types, settings and options are described in the table alongside.

Select

Program

Quick

< Next >

x

3.If you wish to change a setting, you should

index forward or back with the but- tons until the desired setting appears in the dis-

play.

Select

 

 

Program

 

Wool

 

< Next >

x

4. Then index further with the Menu button to the next setting/option, and change it in the same way if required.

5. Repeat this until the finished programme appears in the display together with the spin speed and any preferred temperature and other options. The text Stop will be displayed on the bottom line.

Wool

rpm

 

800

Stop

30°

x

You can now use the programme without sto- ring it (temporary programme). Close the door

and press the button to start the pro- gramme.

Store the programme permanently

If you wish to store the programme for use whenever you intend to use the washing mach- ine, press the Enter button before starting. The button selected by you originally (P1-P4) will appear at the bottom left of the display.

You can now select the programme by pres- sing the button chosen by you in Step 1.

NOTE

The Delayed start option and temperatures over 60°C are not stored permanently.

IMPORTANT

If you store a programme by mistake, you can reset it to its settings at the time of delivery; see Reset programme later in this Chapter.

TIP

If you do not wish to index through all the settings/options, you can terminate the input by pressing the Enter button ONCE.

To store the programme, you must then press

the Enter button once more.

INTERRUPT INPUT

If you change your mind and wish to interrupt the input sequence, you should switch off the

machine with the main power switch . When you switch it on again, you can start from the beginning or select one of the pre-set programmes as usual.

21

Page 20 Page 22
Image 21
Page 20 Page 22
Contents Maytag Contents Transport Supports Before Washing the First TimeWasher Door Check Hardness of the WaterGeneral Safety InstructionsOverfill Protection Interrupting a ProgrammeDisposal TRANSPORT/ Winter StorageChildrens Safety CHILD-SAFE WashingProtect Children Detergent Compartment Parts of the Washing MachineLC-DISPLAY PanelBefore Washing Avoid Creases Washing High Water LevelMinimizing Allergy Hazards Save TimeDetergents Textile DyeingWashing Time Washing with Easy Control Washing1SORT the Washing 3O P E N T H E D O O R a N D P U T I N T H E Washing4PUTTING in the Washing and DETER- Gent 6TEMPORARY Alteration of TEMPERA- Ture and Spin Speed ButtonDuring the Programme Programme with the Button8PROGRAMME Completed 9WHEN Washing is FinishedTemporary Spinning or Rinsing Delayed Start 1-24 HoursConsumption Values PRE-SET Programmes Making OWN Washing Programmes Available Settings and Options Create Your OWN Washing Programme TIPInterrupt Input Reset Programme Available Types of Programme PreSelect High water level Menu System for Changing a Preset ProgrammeThis page has been left blank for technical printing reasons Care and Cleaning Cleaning the Detergent CompartmentCleaning the Outside of the Machine Hard Water Cleaning Holes Under the RidgesFault Indications Trouble ShootingDoor will not Open Machine will not StartWrong Language on the Display Wash motor fault. Phone ServiceCelsius or Fahrenheit TernativeTechnical Data Technical InformationStandard Tests This page has been left blank for technical printing reasons Service and Guarantee ServiceGuarantee Washing Quick GuideChapter Index
Top Page Image Contents