Zanussi Washer Dryer user manual Water connection, Use, Care and Cleaning, Disposal

Page 4

change the fuse in the mains plug, use a 13 amp ASTA (BS 1362) fuse.

This appliance complies with the E.E.C. Di- rectives.

Water connection

Make sure not to cause damage to the water hoses.

The appliance is to be connected to the wa- ter mains using the new supplied hose-sets. Old hose sets must not be reused.

Before you connect the appliance to new pipes or pipes not used for a long time, let the water flow until it is clean.

The first time you use the appliance, make sure that there is no leakage.

Use

Warning! Risk of injury, electrical shock, fire, burns or damage to the appliance.

Use this appliance in a household only.

Do not change the specification of this appli- ance.

Do not put flammable products or items that are wet with flammable products in, near or on the appliance.

Do not touch the glass of the door while a programme operates. The glass can be hot.

Make sure that you remove all metal objects from the laundry.

The final part of the drying cycle occurs with- out heat (cool down cycle) to ensure that the items will not be damaged.

If you stop the appliance before the end of the drying cycle, immediately remove and spread out all items, so that the heat can dis- sipate.

If you use detergent, fabric softener or similar products, obey the instructions on the pack- aging.

Wipe away lint that has accumulated around the appliance.

Do not dry the damaged items which contain padding or fillings .

4

Do not dry items such as foam rubber (latex foam), shower caps, waterproof textiles and rubber backed articles.

Before drying items that have been in con- tact with substances such as cooking oil, acetone, alcohol , petrol, kerosene, spot re- movers, turpentine, waxes and wax removers, wash them in hot water with an extra amount of detergent.

Do not dry items if industrial chemicals have been used for cleaning.

Make sure that no gas lighters or matches have been left in the pockets of the clothing.

Only dry fabrics which are applicable to dry in the tumble dryer. Follow the instructions on the fabric label.

Do not dry not washed items in the appli- ance.

If you have washed your laundry with a stain remover start an extra rinse cycle before you start the appliance.

Plastic items are not heat resistant.

If you use a detergent ball, remove it be- fore you set the drying programme.

Do not use a detergent ball when you set a non-stop programme.

Warning! Risk of injury or damage to the appliance.

Do not sit or stand on the open door.

Obey the maximum load volume.

Do not dry dripping wet clothes in the appli- ance.

Care and Cleaning

Warning! Risk of injury or damage to the appliance.

Do not use water spray and steam to clean the appliance.

Clean the appliance with a moist soft cloth. Only use neutral detergents. Do not use abrasive products, abrasive cleaning pads, solvents or metal objects.

Disposal

www.zanussi.com

Image 4
Contents Washer Dryer ZWT 71201 WA Safety information ContentsSafety instructions InstallationRemove all the packaging and the transit bolts Electrical connectionCare and Cleaning Water connectionUse DisposalChild safety Product descriptionControl panel Detergent dispenser drawerCompartment for liquid additives fabric softener, starch Bers on the following pagesDelay Start SpinRinse hold EcoDisplay shows the following information Duration of the selected programmeWashing programmes For white and coloured cotton normally soiledCottons Drying Programmes Helpful hints and tipsDrying Hints First use PersonalisationDaily Use Load the laundryMeasure out the detergent and the fabric softener Close the drawer gentlySelect the Delay Start by pressing button Select the available options by means of buttons 3, 4Start the programme by pressing button Altering an option or a running programmeUse Drying Ance performs only a cooling phase NON-STOP programme Washing and Timed DryingDrying programme Fluff in the garmentsCare and cleaning Clean the filter under a tap, to remove any traces of fluff Cleaning the water inlet filtersFrost precaution What to do if…Turn on the water tap Turn off the water tap Unscrew the inlet hoseProblem Replace it with a new one Technical data Installation Bient temperatureConsumption values UnpackingPositioning Raising the applianceWater inlet Water drainage This appliance must be connected to a cold water supplyInto a drainage standpipe Onto a sink outlet spigot Drain hose may be extended to a maxiInterest of the environment 35 Ø 12,5-14 depth Building416 22±1,5 595-598 Door HingesCounter-magnet Mounting the doorGraphic F 100600-605 490Electrical connection Environment concernsChine Packaging materials132927931-A-462012