Tuning in to a preset station
You can easily tune in to a preset station. Remember that you must store stations first. If you have not stored them yet, see “Storing stations in memory” on pages 11 and 12.
Selecting a preset station directly
1 Select the band (FM1 – 3, AM).
Each time you press the button, the band changes as follows:
FM1 
FM2 
FM3 
AM
2 Select the number (1 – 6) for the preset station you want.
Note:
You can also use the 5(up) or ∞(down) button on the unit to select the next or previous preset stations. Each time you press the 5(up) or ∞(down) button, the next or previous preset station is tuned in.
Selecting a preset station using the preset station list
If you forget what stations are stored in what preset numbers, you can check the preset station list, then select your desired station.
1 Select the band (FM1 – 3, AM).
Each time you press the
button, the band changes as follows:
FM1 
FM2 
FM3 
AM
2 Press and hold 5 (up) or ∞ (down) until the preset station list for the current band (FM1, FM2, FM3, or AM) appears on the display.
Notes:
•You can show the other FM band preset station lists (FM1, FM2, or FM3) by pressing 5 (up) or ∞ (down).
•If a name has been assigned to a station (see page 31), it will be shown instead of the station frequency.
3 Select the number (1 – 6) for the preset station you want.
ENGLISH
13