ENGLISH
Storing your own sound adjustments
You can adjust the sound modes to your preference and store your own adjustments in memory (User 1, User 2, and User 3).
•There is a time limit in doing the following procedure. If the setting is canceled before you finish, start from step 1 again.
1 Press EQ (equalizer).
The
buttons start flashing.
2 Select the sound mode you want to adjust.
Ex.: When you select “Country” previously
3 Enter the sound adjustment mode.
The following sound mode adjustment
screen appears on the
2)Press 5 (up) or ∞ (down) to adjust the level of the selected band within the range of
3)Repeat steps 1) and 2) to adjust the other frequency bands.
5 Store the adjustment you made.
The confirmation message
store the adjustment.
If you want to cancel the adjustments,
press EQ (equalizer).
6 Select one of the user sound modes (User 1, User 2, or User 3) you want to store into.
display. |
Ex.: When you select “User 1”
4 Make adjustments as you like.
1)Press ¢ or 4 to select the frequency
22