Whirlpool W10101293A installation instructions Laundry Tower Care, InstalltheLaundryTower

Page 3

3.Attach the brackets to the back of the laundry tower using the screws (provided). Align the brackets so that the latch is pointing up.

4.Attach the console to the laundry tower. Align the locators with the brackets and push down until the latches snap into place and the magnets on the bottom of the console attach to the top panel.

NOTE: Once installed, the console can be removed only by removing the 2 console screws.

A

B

2.To determine how far to extend the leveling feet, measure the height of the washer and/or dryer you are installing the laundry tower next to or between.

NOTE: Refer to the laundry tower dimensions in “Location Requirements.”

3.Place a piece of cardboard on the floor and, using two or more people, lay the laundry tower on its side.

A.Locator

B.Latch

InstalltheLaundryTower

WARNING

Excessive Weight Hazard

Use two or more people to move and install laundry tower.

Failure to do so can result in back or other injury.

1.Using two or more people, situate the laundry tower near its final location. Open the drawers to remove any contents stored inside.

4.Turn all four feet out to the dimension determined in Step 2.

5.Using two or more people, return the laundry tower to the upright position.

6.Check the laundry tower height and levelness and adjust the feet as needed.

7.Once the laundry tower is at the appropriate height and is level, use a ⁹⁄₁₆" (14 mm) open-end wrench to securely tighten all four locknuts against the laundry tower.

A

A.Locknut

8.Using two or more people, slide the laundry tower into its final location and confirm height and levelness.

LAUNDRY TOWER CARE

To clean the interior and exterior:

■Use a soft damp cloth or sponge to wipe up any spills. Occasionally wipe the surfaces of your laundry tower to help keep it looking new.

■Use mild soap and water; do not use abrasive products.

■NOTE: Do not lift the front of the console off the laundry tower without first removing the console screws.

3

Page 2 Page 4
Image 3
Page 2 Page 4
Contents Organisateur DE Buanderie Laundry Tower SafetyLaundry Tower Organizador DE LavanderíaToolsandParts Installation RequirementsInstallation Instructions InstalltheConsoleoptionalInstalltheLaundryTower To clean the interior and exteriorLaundry Tower Care ONE Year Limited Warranty Items Whirlpool will not PAY forDisclaimer of Implied Warranties Limitation of Remedies Piezas suministradas Requisitos DE InstalaciónPiezasy herramientas Herramientas requeridasInstrucciones DE Instalación RequisitosdeubicaciónCómoinstalarlaconsolaopcional Cuidado DEL Organizador DE Lavandería CómoinstalarelorganizadordelavanderíaPara limpiar el interior y el exterior Exclusión DE Garantías Implícitas Limitación DE Recursos Whirlpool CorporationGarantía Limitada DE UN AÑO Whirlpool no Pagará POR LOS Siguientes ArtículosOutillage nécessaire Exigences DinstallationSécurité DE Lorganisateur DE Buanderie OutillageetpiècesInstructions Dinstallation ExigencesdemplacementInstallationdelaconsolefacultatif Nettoyage de lintérieur et de lextérieur InstallationdelorganisateurdebuanderieGarantie DES Appareils DE Buanderie Whirlpool Corporation Garantie Limitée DE UN ANWhirlpool NE Prendra PAS EN Charge

W10101293A specifications

The Whirlpool W10101293A is a high-efficiency water filter that is designed to provide clean and refreshing water for your household needs. This particular model is compatible with various refrigerator brands, enhancing the long-term performance of your appliance while ensuring you have access to pure drinking water at all times. One of the standout features of this water filter is its ability to reduce a range of harmful contaminants, including lead, chlorine, and sediment. This capability ensures that the water you consume is not only safe but also tastes better.

The W10101293A filter uses advanced filtration technology that employs activated carbon to effectively capture impurities. This technology is particularly effective at improving the taste and odor of your drinking water by removing chemicals and other unwanted substances. With an easy installation process, homeowners can replace the water filter without the need for any specialized tools or professional assistance. The filter is designed to fit seamlessly in select Whirlpool and compatible refrigerator models, making it a versatile choice for many.

Another characteristic that makes the Whirlpool W10101293A a popular choice is its impressive lifespan. Each filter can last up to six months, depending on water usage and the level of contaminants present in your water supply. This longevity reduces the frequency and cost associated with filter replacements, providing convenience for busy households. Additionally, the filter is certified by the NSF (National Sanitation Foundation), ensuring it complies with rigorous safety and quality standards.

Moreover, the W10101293A is eco-friendly, as it aims to contribute to environmental sustainability by reducing the need for bottled water. By providing an affordable solution for clean water, this filter not only promotes a healthier lifestyle but also aids in reducing plastic waste. With its blend of advanced features, reliable performance, and environmental benefits, the Whirlpool W10101293A water filter is an essential accessory for any modern kitchen, ensuring that families can enjoy clean, crisp water straight from their refrigerator. Whether it’s for drinking, cooking, or making ice, this filter guarantees peace of mind that you are consuming water of the highest quality.
Top Page Image Contents