OPERATING YOUR WASHER
Selecting a cycle, time, and temperature
Use the information in this section to help you make the best cycle selections for your wash loads. Each cycle is designed for different types of fabrics and soil levels.
•The washer pauses briefly throughout each cycle. These pauses are normal for washer operation.
•Page 12 describes what happens during a wash cycle.
NORMAL | Rinse |
COLD 10
Spin
WARM 14
OFF
PULL START PUSH STOP
Water temperature selector in Cycle Control Knob
Normal cycle
The Normal cycle features either WARM or COLD water and longer spins to shorten drying time. Select the
Cycle options
You may select a different wash time by first selecting the water temperature (Warm or Cold) and then turning to the new wash time. For example, for 14 minutes of wash time with Cold water:
1.Push in the Cycle Control Knob and turn it clockwise to Cold.
2.Pull out the Cycle Control Knob and allow your washer to fill.
3.When your washer has filled, push in and turn the Cycle Control Knob to Heavy, 14 minutes of wash time.
4.Pull out the Cycle Control Knob.
10